Sharp MS702 Operation Manual - Page 41

MAINTENANCE s Cleaning When the unit becomes dirty Clean it with a soft cloth. When the unit is excessively dirty, use a soft cloth dampened in water. (External surfaces only) Clean the headphone plug and the RCA cord plug. This will prevent noise. Notes: q Do not use chemicals for cleaning (gasoline, paint thinner, etc.) It may affect the quality or color. q Do not apply oil to the inside of the unit. It may cause malfunctions. SPECIFICATIONS As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. s General Power source: Power consumption: Output power: Charging time: Battery life: DC 3.6V (rechargeable lithium-ion battery x 1) DC 5V (AC adaptor) AC 120V, 60 Hz DC 3V: Optionally available battery case, AD-M70BC (commercially available, "AA" size, alkaline battery x 2) DC 4.5V: Optionally available car adaptor, AD-CA20X (for cars with a 12-24V DC negative ground electrical system) 0.15 A (AC adaptor) 4 W RMS; 20 mW (10 mW + 10 mW) (0.2% T.H.D.) Approx. 2.5 hours (When using the AC adaptor included with the unit) When using the rechargeable battery (fully charged) included with the unit Continuous recording: Approx. 3.5 hours Continuous play: Approx. 5 hours When using two, commercially available, high capacity, "AA" size, alkaline batteries (in the optionally available battery case) Continuous recording: Approx. 4 hours Continuous play: Approx. 8 hours When using two, commercially available, high capacity, "AA" size batteries with the rechargeable battery (fully charged) Continuous recording: Approx. 7.5 hours Continuous play: Approx. 13 hours 40 MD-MS702