Sharp MX-3140N Operation Guide - Page 476
Transmitting An Image
View all Sharp MX-3140N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 476 highlights
SCANNER/INTERNET FAX TRANSMITTING AN IMAGE SENDING AN IMAGE IN SCAN MODE This section explains the basic procedure for transmission in scan mode (Scan to E-mail, Scan to FTP, Scan to Desktop, and Scan to Network Folder). When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added. If you wish to change the mode or destination, touch the [Cancel] key in the touch panel and then follow the procedure below. When "Default Address Setting" is set to "Apply E-mail address of the user for login.", pressing the [Add Address] key on the touch panel switches modes and adds addresses. Original size detector Place the original. Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size. • When placing the originals, orient them as shown below. Originals Document feeder tray Place the original face up. Document glass Place the original face down and align the corner with the tip of the arrow mark in the top left corner of the document glass scale. Portrait orientation* 1 1 1 1 1 Landscape orientation 1 1 * To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the placement orientation in step 3. • Place A5 (5-1/2" x 8-1/2") size originals in portrait (vertical) orientation ( ). If placed in landscape (horizontal) orientation ( ), an incorrect size will be detected. For a A5R (5-1/2" x 8-1/2"R) size original, enter the original size manually. • Originals cannot be scanned in succession from both the automatic document feeder and the document glass and sent in a single transmission. 5-28 Contents