Sharp MX-3140N Operation Guide - Page 692
Energy Save
View all Sharp MX-3140N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 692 highlights
SYSTEM SETTINGS Energy Save The Energy Save settings help reduce power costs. From an environmental perspective, these settings also help reduce pollution and conserve natural resources. Touch the [Energy Save] key to configure the settings. Toner Save Mode You can reduce the amount of toner used for printing. Print data Print example when "Toner Save Mode" is enabled • [Print] in Toner Save Mode is only effective when the machine's printer driver is not used. When the printer driver is used, the printer driver setting takes precedence. This function may not operate in some applications and operating systems. • [Copy] in Toner Save Mode is not available in United Kingdom. Auto Power Shut-Off This setting enables or disables Auto Power Shut-Off. Remove the checkmark if you prefer that Auto Power Shut-Off does not operate. When the set duration of time elapses after printing ends, Auto Power Shut-Off activates and causes to machine to go on standby at a minimal level of power consumption. This function reduces your power costs, and at the same time helps conserve natural resources and reduce pollution. It is recommended that you understand the objective behind the energy save functions and instead of using the machine in the state where the Auto Power Shut-Off function is disabled, adjust the settings such that the time till Auto Power Shut-Off is enabled is a little longer or set a time zone for Auto Power Shut-Off. (Settings that depend on the usage conditions, such as the time till Auto Power Shut-Off is enabled can be configured in the following "Auto Power Shut-Off Timer".) Transitioning to Auto Power Shut-Off Immediately After Completion of Remote Job When in Auto Power Shut-Off state, the machine transitions immediately into Auto Power Shut-Off mode after printing from a personal computer or after outputting received fax data. Auto Power Shut-Off Timer Settings that depend on the usage conditions, such as the time till Auto Power Shut-Off is enabled or the time zone for Auto Power Shut-Off can be configured. In case of "Fix transition time", it can be set to "Earliest" or within a range of 1 to 240 minutes. When "As soon as the remote job is finished, enter Auto power shut off mode" is enabled, Auto Power Shut-Off happens in a short while after the print job or fax reception is complete. In case of settings that depend on the usage conditions, select "Change transition time by time of day". As per the default settings, the time zone is set automatically depending on the application conditions of the machine. When it is to be selected manually, you can select from the following. • All Day "Energy Save Priority2": To be set when you want Auto Power Shut-Off to be enabled in minimum time in any time zone. • 8:00-18:00 "Energy Save Priority1": To be set when this machine is to be used more frequently in this time zone than other time zones. • 8:00-18:00 "Job Start Priority1": To be set when the frequency of use of this machine in this time zone is significantly more. • Settings edited to match the usage conditions, combining the three patterns given above can also be selected. Change transition time by time of day By analyzing the usage of the machine from the job log over four weeks, you can manage transitions into Auto Power-Off mode according to time blocks. Enabling this feature disables "Fix transition time". • Fusing control is not changed. • This feature does not work in tandem with power On/Off scheduling. If both are enabled, the power On/Off scheduling setting will take precedence. • Paper count is calculated by paper size. • Any period during which the machine's power is off, is considered the same as when there were no jobs. 7-60 Contents