Sharp MX-4140N Quick Start Guide - Page 21

SPECIFICATIONS Punch module (for saddle finisher) Network Printer Specifications Name Paper size for punch module Holes Required power supply Dimensions Weight Punch module for MX-FN18 Punch module for MX-FN10 MX-PNX6A, MX-PNX6B, MX-PNX6C, MX-PNX5A, MX-PNX5B, MX-PNX5C, MX-PNX6D MX-PNX5D A3 (11" × 17") to A4 (8-1/2" × 11") MX-PNX6A 2 holes, MX-PNX6B 3 holes MX-PNX5A 2 holes, MX-PNX5B 3 holes MX-PNX6C 4 holes, MX-PNX6D 4 holes (wide) MX-PNX5C 4 holes, MX-PNX5D 4 holes (wide) Supplied from saddle finisher 115 mm (W) × 600 mm (D) × 995 mm (H) (4-17/32" (W) × 23-5/8" (D) × 39-11/64" (H)) 122 mm (W) × 604 mm (D) × 248 mm (H) (4-13/16" (W) × 23-25/32" (D) × 9-49/64" (H)) Approx. 8 kg (17.6 lbs.) Approx. 3.5 kg (7.7 lbs. or less) Fax Specifications Type Continuous print speed Resolution Page description language Compatible protocols Compatible OS Internal fonts Memory Interface Built-in type Same as continuous copy speed Data processing: 600 × 600 dpi, 1,200 × 1,200 dpi Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi, 1,200 × 1,200 dpi Standard: PCL6 emulation, Adobe® PostScript®3™, XPS* TCP/IP (IPv4/IPv6), IPX/SPX, IPP, EtherTalk Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, Windows 8, Windows Server 2012 Macintosh (Mac OS X 10.4, 10.5, 10.6, 10.7, 10.8)* 80 fonts for PCL, 136 fonts for Adobe® PostScript®3™ Machine system memory and hard disk 10BASE-T/100BASE-TX/1000BASE-T, USB 2.0 (high speed mode) * XPS stands for XML Paper Specification. When equipped with the XPS expansion kit (MX-PUX1). Name Useable lines Scanning line density Connection speed Coding method Connection mode Original paper sizes for transmission Registered paper size Transmission time Memory Notes Facsimile expansion kit (MX-FX11) General phone lines (PSTN), private branch exchange (PBX) Normal characters: 8 dot/mm × 3.85 chars/mm Small characters: 8 dot/mm × 7.7 line/mm Fine characters: 8 dot/mm × 15.4 line/mm High-definition: 16 dot/mm × 15.4 line/mm Super G3: 33.6 kbps, G3: 14.4 kbps MH, MR, MMR, JBIG Super G3 / G3 A3 (11" × 17") to A5 (5-1/2" × 8-1/2") (Paper with a max. length of 1,000 mm can be transmitted (one-sided and B/W only).) A3 (11" × 17") to A5 (5-1/2" × 8-1/2") Approx. 2 seconds *1 (A4 (8-1/2" × 11") Sharp standard paper, normal characters, Super G3 (JBIG)) Approx. 6 seconds (G3 ECM) 1 GB Touch dial memory Max. of 2,000 entries (Including group dialling for fax, scanner, and Internet fax) Entries per group Max. of 500 entries Mass transmissions Max. of 500 recipients *1 Complies with the 33.6 kbps transmission method for Super G3 facsimiles standardized by the International Telecommunications Union (ITU-T). This is the speed for when sending an A4 (8-1/2" × 11") size piece of paper of around 700 characters at standard image quality (8 × 3.85 chars/mm) in Hi-speed mode (33.6 kbps). This is the transmission speed for image information only and does not include time for transmission control. The actual time needed for a transmission depends on the content of the text, type of receiving fax machine, and telephone line conditions. 21