Sharp MX-M310 Online Manual - Page 70
Check the machine, jam in the finisher, out of paper, or out of toner?
View all Sharp MX-M310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
6 TROUBLESHOOTING Printing does not take place (part 3) Check the machine ■ Power switch on? Turn the power switch on. (See "POWER ON AND OFF" in the operation manual) ■ Is the machine online? When the ON LINE indicator next to the [PRINT] key on the operation panel is lit, the machine is online and ready to print. If the ON LINE indicator is off, press the [PRINT] key and then touch the [ONLINE] key. (When [ONLINE] is highlighted, the machine is online.) COPY PRINT SCAN FAX ON LINE DATA DATA LINE DATA ONLINE OFFLINE 1/1 BYPASS TRAY CONDITION SETTINGS ■ Has an error occurred such as a paper misfeed, staple jam in the finisher, out of paper, or out of toner? When one of the above errors occurs, a message will appear in the touch panel to alert you. Follow the instructions in the message to clear the error. Printing will automatically resume when the error is cleared. For information on handling errors, see "TROUBLESHOOTING" in operation manual. ■ Copy job being performed? Wait until copying is finished. You can also select the key of the job that you wish to print in the job status screen and then touch the [PRIORITY] key. Copying will be interrupted and the selected job printed. ☞Giving priority to a print job ■ Is the "I/O TIMEOUT" setting too short? Set a longer time for "I/O TIMEOUT" in the system settings (administrator) (see "I/O TIMEOUT" in the "SYSTEM SETTINGS (ADMINISTRATOR)" in the operation manual). If a Notice Page is printed, see "If a notice page is printed". CONTENTS 70