Sharp NP-UM383WL Users Manual

Sharp NP-UM383WL Manual

Get Sharp NP-UM383WL PDF manuals and user guides View all Sharp NP-UM383WL manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp NP-UM383WL manual content summary:

  • Sharp NP-UM383WL | Users Manual - Page 1
    Projector UM383WL User's Manual Please visit our web site for User's Manual in the latest version: https://www.nec-display.com/dl/en/pj_manual/lineup.html Model No. NP-UM383WL
  • Sharp NP-UM383WL | Users Manual - Page 2
    other countries and is used under license. • APP Store is a service mark of Apple Inc. • Microsoft, Windows, Windows Vista, Internet Explorer Google Inc. • Other product names and logos mentioned in this user's manual may be the trademarks or registered trademarks of their respective holders. •
  • Sharp NP-UM383WL | Users Manual - Page 3
    VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns information should be read carefully to avoid problems. WARNING: TO PREVENT FIRE OR SHOCK, of America, Inc. in this manual. Failure to comply with this in accordance with the instructions, may cause harmful
  • Sharp NP-UM383WL | Users Manual - Page 4
    correct method of disposal. Important Safeguards These safety instructions are to ensure the long life of your - In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance with manual, otherwise light life could decrease dramatically. ii
  • Sharp NP-UM383WL | Users Manual - Page 5
    the projector, unplug the power cord and have the projector serviced by a qualified service personnel. • Handle the power cord carefully. A damaged or the projector does not operate normally when you follow the instructions described in this user's manual. - If the projector has been dropped or the
  • Sharp NP-UM383WL | Users Manual - Page 6
    or cables attached ferrite cores so as not to interfere with radio and television reception. For details, please refer to "6.2. Making Connections" in this user's manual. iv
  • Sharp NP-UM383WL | Users Manual - Page 7
    Important Information Power management function The projector has power management functions. To reduce power consumption, the power management functions (1 and 2) are factory preset as shown below. To control the projector from an external device via a LAN or serial cable connection, use the on-
  • Sharp NP-UM383WL | Users Manual - Page 8
    Important Information i 1. Introduction...1 ❶ What's in the Box?...1 ❷ Introduction to the Projector 2 Features you'll enjoy 2 About this user's manual 3 ❸ Part Names of the Projector 4 Front/Top...4 Rear...5 Controls/Indicator Panel 6 Terminal Panel Features 7 ❹ Part Names of the Remote
  • Sharp NP-UM383WL | Users Manual - Page 9
    Table of Contents ❻ Preventing the Unauthorized Use of the Projector [SECURITY 34 ❼ Controlling the Projector by Using an HTTP Browser 37 4. Using the Viewer 43 ❶ What you can do with the Viewer 43 ❷ Projecting images stored in a USB memory device 45 5. Using On-Screen Menu 51 ❶ Using the
  • Sharp NP-UM383WL | Users Manual - Page 10
    Projection Window 95 ❸ Cleaning the Cabinet 95 8. Appendix ...96 ❶ Troubleshooting ...96 Feature of each indicator 96 Indicator Message (Status message 96 message 97 Explanation on the POWER indicator and standby state 98 Common Problems & Solutions 100 If there is no picture, or the picture
  • Sharp NP-UM383WL | Users Manual - Page 11
    projector. Projector Remote control (7N901053) Batteries (AAA × 2) Power cord (7N080236/7N080242) Computer cable (VGA) (7N520089) • Important Infomation (7N8R0231) • Quick Setup Guide (7N8R0241) NEC Projector CD-ROM User's manual (PDF) (7N952943) For North America only Limited warranty 1
  • Sharp NP-UM383WL | Users Manual - Page 12
    The projector is equipped with a variety of input terminals: HDMI (× 2), Computer (analog), Video. HDMI input terminal on this product supports HDCP. • Compatible with the MultiPresenter application This projector is compatible with the NEC MultiPresenter application, so multi-screen projection is
  • Sharp NP-UM383WL | Users Manual - Page 13
    projector. • Convenient utility software (User Supportware) This projector supports our utility software (NaViSet Administrator 2, Virtual Remote Tool, MultiPresenter, has been installed, by inputting PIN code. About this user's manual The fastest way to get started is to take your time and do
  • Sharp NP-UM383WL | Users Manual - Page 14
    ❸ Part Names of the Projector Front/Top Focus Ring (→ page 18) Lens shift cover (→ page 16) Controls (→ page 6) Indicators (→ page 6) Remote Sensor (→ page 9) 1. Introduction Zoom Lever (→ page 19) Lens (Projection Window) Exhaust Vent Heated air is exhausted from here. Stereo Speaker (10W )
  • Sharp NP-UM383WL | Users Manual - Page 15
    power cord's three-pin plug here, and plug the other end into an active wall outlet.(→ page 11) Built-in Security Slot ( )* * This security slot supports the MicroSaver ® Security System. 1. Introduction Intake Vent / Filter Cover (→ page 93) Rear Foot (→ page 21) 5
  • Sharp NP-UM383WL | Users Manual - Page 16
    Controls/Indicator Panel 1. Introduction 2 34 5 1 6 7 8 11 9 10 1. (POWER) Button (→ page 12, 25) 2. POWER Indicator (→ page 11, 12, 25, 96) 3. STATUS Indicator (→ page 96) 4. LIGHT Indicator (→ page 96) 5. ECO Button (→ page 28) 6. SOURCE Button (→ page 14) 7. AUTO ADJ. Button (→ page 24
  • Sharp NP-UM383WL | Users Manual - Page 17
    ) (→ page 86, 87, 90) 3. HDMI 1 IN Terminal (Type A) (→ page 86, 87, 91) 4. HDMI 2 IN Terminal (Type A) (→ page 86, 87, 91) 5. SERVICE Port (USB Type B) (for service purpose only) 6. COMPUTER OUT Terminal (Mini D-Sub 15 Pin) (→ page 88) 7. AUDIO OUT Mini Jack (Stereo Mini) (→ page 88) 8. VIDEO IN
  • Sharp NP-UM383WL | Users Manual - Page 18
    1. Introduction  Part Names of the Remote Control 1 3 2 4 6 5 7 8 10 9 13 11 16 15 12 14 17 18 20 19 21 22 26 23 28 24 25 29 27 30 33 31 32 1. Infrared Transmitter (→ page 9) 2. POWER ON Button (→ page 12) 3. POWER STANDBY Button (→ page 25) 4. SOURCE Button (→ page
  • Sharp NP-UM383WL | Users Manual - Page 19
    Battery Installation 1. Press firmly and slide the battery cover off. 2. Install new batteries (AAA). Ensure that you have the batteries' polarity (+/−) aligned correctly. 1. Introduction 3. Slip the cover back over the batteries until it snaps into place. Do not mix different types of batteries
  • Sharp NP-UM383WL | Users Manual - Page 20
    2. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. ❶ Flow of Projecting an Image Step 1 • Connecting your computer / Connecting the power cord (→ page 11) Step 2 • Turning on the projector (→ page 12) Step 3 •
  • Sharp NP-UM383WL | Users Manual - Page 21
    2. Projecting an Image (Basic Operation) ❷ Connecting Your Computer/Connecting the Power Cord 1. Connect your computer to the projector. This section will show you a basic connection to a computer. For information about other connections, see "6. Installation and Connections" on page 86. Connect the
  • Sharp NP-UM383WL | Users Manual - Page 22
    ❸ Turning on the Projector 2. Projecting an Image (Basic Operation) 1. Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control. The POWER indicator will blink and the projector will become ready to use. TIP: • When the message "Projector is locked! Enter
  • Sharp NP-UM383WL | Users Manual - Page 23
    2. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you firs turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 30 menu languages. To select a menu language, follow these steps: 1. Use the or
  • Sharp NP-UM383WL | Users Manual - Page 24
    2. Projecting an Image (Basic Operation) ❹ Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Detecting the Signal Automatically Press the SOURCE button once. The projector will search for the available input
  • Sharp NP-UM383WL | Users Manual - Page 25
    2. Projecting an Image (Basic Operation) ❺ Adjusting the Picture Size and Position Use the lens shift dial, the adjustable tilt foot lever, the zoom lever and the focus ring to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity. Adjusting the projected
  • Sharp NP-UM383WL | Users Manual - Page 26
    2. Projecting an Image (Basic Operation) Adjusting the position of a projected image (Lens shift) CAUTION: Perform the adjustment from behind or from the side of the projector. Adjusting from the front could expose your eyes to strong light which could injure them. 1. Open the lens shift cover. Open
  • Sharp NP-UM383WL | Users Manual - Page 27
    2. Projecting an Image (Basic Operation) 3. Close the lens shift cover. Insert the cover's 2 (two) hooks into the grooves in the projector, then close the cover. Hook Groove TIP: • The diagram below shows the lens shift adjustment range ([ORIENTATION]: [DESKTOP FRONT]). • For the lens shift
  • Sharp NP-UM383WL | Users Manual - Page 28
    Focus (Focus ring) 1. Open the lens shift cover. Open with the cover's stopper pushed forward. • The lens shift cover cannot be removed. 2. Projecting an Image (Basic Operation) 2. Rotate the Focus ring until you obtain the best focus. Stopper Focus ring 3. Close the lens shift cover. Insert the
  • Sharp NP-UM383WL | Users Manual - Page 29
    Zoom (Zoom lever) 2. Projecting an Image (Basic Operation) 1. Open the Zoom cover. The zoom cover is a spring buckle, which can be opened by gently pressing down. • The zoom cover cannot be removed. Spring buckle 2. Adjust the Zoom lever left or right, until you obtain the best zoom. Zoom lever
  • Sharp NP-UM383WL | Users Manual - Page 30
    2. Projecting an Image (Basic Operation) Adjusting the size [Digital Zoom] Use the remote control to finely adjust the size of the image. 1. Press the FOCUS/ZOOM button on the remote control. The DIGITAL ZOOM bar will be displayed. 2. Press the  or  button to finely zoom in or out. 3. After
  • Sharp NP-UM383WL | Users Manual - Page 31
    Adjusting the tilt (Tilt foot) Adjusting the left and right tilt. 2. Projecting an Image (Basic Operation) 1. Rotate the tilt foot to adjust the left and right tilt. The tilt foot is equipped at the left and the right front bottom of the projector. If the projected image is tilted, rotate one of
  • Sharp NP-UM383WL | Users Manual - Page 32
    2. Projecting an Image (Basic Operation) ❻ Correcting Keystone Distortion [KEYSTONE] When the projector is not exactly perpendicular to the screen, keystone distortion occurs. For correcting this distortion, you can use the "Keystone" function, a digital technology that can adjust for keystone-type
  • Sharp NP-UM383WL | Users Manual - Page 33
    2. Projecting an Image (Basic Operation) 4. Press the ▲ button to select [KEYSTONE HORIZONTAL] and then use the ◀ or ▶ so that the top and bottom sides of the projected image are parallel. • Adjust the horizontal keystone distortion. 5. Repeat steps 2 and 4 to correct keystone distortion. 6. After
  • Sharp NP-UM383WL | Users Manual - Page 34
    be displayed correctly. • If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE] manually. (→ page 60, 61 ) ❽ Turning Up or Down Volume Sound level from the speaker or audio output can be adjusted. Increase volume Decrease
  • Sharp NP-UM383WL | Users Manual - Page 35
    2. Projecting an Image (Basic Operation) ❾ Turning off the Projector To turn off the projector: 1. First, press the (POWER) button on the projector cabinet or the STANDBY button on the remote control. The confirmation message will be displayed. 2. Secondly, press the ENTER button or press the (
  • Sharp NP-UM383WL | Users Manual - Page 36
    3. Convenient Features ❶ Turning off the Image and Sound Press the AV-MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. The projector's power-saving function will work 10 seconds after the image is turned off. As a result, the light
  • Sharp NP-UM383WL | Users Manual - Page 37
    ❸ Magnifying a Picture You can enlarge the picture up to four times. NOTE: The maximum magnification may be less than four times depending on the signal. To do so: 1. Press the D-ZOOM (+) button to magnify the picture. To move the magnified image, use the or ▶ button. 3. Convenient Features 2.
  • Sharp NP-UM383WL | Users Manual - Page 38
    3. Convenient Features ❹ Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode [ECO MODE] [ECO MODE] [OFF] [AUTO ECO] [NORMAL] Description Status of LIGHT indicator The light brightness is 100%. Light power consumption will be changed between [100%] and [80%] automatically according to
  • Sharp NP-UM383WL | Users Manual - Page 39
    3. Convenient Features Checking Energy-Saving Effect [CARBON METER] This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector's [ECO MODE] is set to [AUTO ECO], [NORMAL], or [ECO]. This feature is called as [CARBON METER]. There are two messages: [TOTAL
  • Sharp NP-UM383WL | Users Manual - Page 40
    3. Convenient Features ❺ Using 4-Point Corner to Correct Keystone Distortion [CORNERSTONE] Use the [CORNERSTONE] and [PINCUSHION] features to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right side of the screen longer or shorter so that the projected image is
  • Sharp NP-UM383WL | Users Manual - Page 41
    3. Convenient Features TIP: If either CORNERSTONE or PINCUSION is adjusted, the options KEYSTONE VERTICAL and KEYSTONE HORIZONTAL become unavailable. In this case, RESET the corrected values and restart to correct distortion. 5. Use the button to select one icon (▲) which points in the direction
  • Sharp NP-UM383WL | Users Manual - Page 42
    3. Convenient Features Pincushion By this feature, it enables to adjust left and right side or top and bottom side independently for reforming pincushion distortion. 1. Press the KEYSTONE button with no menu displayed. The KEYSTONE screen will be displayed. • Press the KEYSTONE button when using the
  • Sharp NP-UM383WL | Users Manual - Page 43
    Reset the keystone and pincushion adjustment to the default value 3. Convenient Features 1. Press the KEYSTONE button with no menu displayed. ON the displayed KEYSTONE menu, set the cursor at RESET using the ▼ button and press ENTER button. • Confirmation message is displayed on. 2. Move the
  • Sharp NP-UM383WL | Users Manual - Page 44
    3. Convenient Features ❻ Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is
  • Sharp NP-UM383WL | Users Manual - Page 45
    3. Convenient Features 7. Type in the same combination of buttons and press the ENTER button. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The SECURITY function has been enabled. To turn on the projector when [SECURITY] is enabled: 1. Press the POWER button
  • Sharp NP-UM383WL | Users Manual - Page 46
    To disable the SECURITY function: 1. Press the MENU button. The menu will be displayed. 3. Convenient Features 2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button. The OFF/ON menu will be displayed. 3. Select [OFF] and press the ENTER button. The SECURITY KEYWORD screen
  • Sharp NP-UM383WL | Users Manual - Page 47
    3. Convenient Features ❼ Controlling the Projector by Using an HTTP Browser Overview The HTTP Server function provides settings and operations for: 1. Setting for wired network (NETWORK SETTINGS) To use wired LAN connection, connect the projector to the computer with a commercially available LAN
  • Sharp NP-UM383WL | Users Manual - Page 48
    3. Convenient Features Handling of the Address for Operation via a Browser Regarding the actual address that is entered for the address or entered to the URL column when operation of the projector is via a browser, the host name can be used as it is when the host name corresponding to the IP address
  • Sharp NP-UM383WL | Users Manual - Page 49
    3. Convenient Features PICTURE: Controls the video adjustment of the projector. CONTRAST Increases the contrast adjustment value. CONTRAST Decreases the contrast adjustment value. BRIGHTNESS Increases the brightness adjustment value. BRIGHTNESS Decreases the brightness adjustment value.
  • Sharp NP-UM383WL | Users Manual - Page 50
    NETWORK SETTINGS 3. Convenient Features • SETTINGS PIN PIN TYPE PIN CODE APPLY Select type of PIN code. ONE-TIME The PIN CODE is automatically created every time powering ON the projector. Created PIN CODE is kept unchanged until the projector is powered OFF. STATIC Enables to set up random
  • Sharp NP-UM383WL | Users Manual - Page 51
    WIRED LAN ENABLE DISABLE SETTING DHCP ON DHCP OFF IP ADDRESS SUBNET MASK GATEWAY AUTO DNS ON AUTO DNS OFF APPLY 3. Convenient Features Turn on wired LAN connection Turn off wired LAN connection Set for wired LAN. Automatically IP ADDRESS, SUBNET MASK, and GATEWAY are assigned to the projector by
  • Sharp NP-UM383WL | Users Manual - Page 52
    3. Convenient Features • NETWORK SERVICE PJLink PASSWORD HTTP PASSWORD AMX BEACON Set a password for PJLink*. Japan Business Machine and Information System Industries Association (JBMIA) in 2005. The projector supports all the commands of PJLink Class 1. Setting of PJLink will not be affected even
  • Sharp NP-UM383WL | Users Manual - Page 53
    is available, presentations can be conducted simply with the projector. • Supported graphic format is JPEG. • The Viewer displays the thumbnail screen ( wish to project. • There are two ways of playback for slideshow: manual playback and auto playback. The interval time can be changed in auto
  • Sharp NP-UM383WL | Users Manual - Page 54
    computer, refer to the document or help file that comes with your Windows. - We do not warrant that the USB port of the projector will support all USB memories in the market. • Supported images - Supported file format for Viewer are as follows. We do not warrant all the images are
  • Sharp NP-UM383WL | Users Manual - Page 55
    4. Using the Viewer ❷ Projecting images stored in a USB memory device This section explains the basic operation of the Viewer. The explanation provides the operational procedure when the Viewer toolbar (→ page 49) is set to the factory default. - Starting the Viewer below - Removing the USB memory
  • Sharp NP-UM383WL | Users Manual - Page 56
    4. Press the ENTER button. The thumbnail screen will be displayed. (→ page 48) 5. Use the ▲▼◀ or ▶ button to select an icon. • The → (arrow) symbol on the right indicates there are more pages. Pressing the PAGE ▽ (page down) button will show the next page; pressing the PAGE △ (page up) will show the
  • Sharp NP-UM383WL | Users Manual - Page 57
    Removing the USB memory from the projector 1. Select the VIEWER start screen. Press the EXIT button with no menu displayed. 2. Remove the USB memory from the projector. Make sure that the LED on the USB memory is not flashing before removing the USB memory. NOTE: If you remove the USB memory from
  • Sharp NP-UM383WL | Users Manual - Page 58
    directly. This toolbar is used in the thumbnail screen. Pressing the MENU button will display this toolbar. (→ page 49) This screen is used for manual playback. The selected image will be displayed in full screen. This toolbar is used in the slide screen. Pressing the MENU button will display this
  • Sharp NP-UM383WL | Users Manual - Page 59
    Using the toolbar 4. Using the Viewer 1. Press the MENU button. The toolbar will be displayed. The SOURCE screen will be displayed as Viewer connection screen. 2. Use the ◀ or ▶ button to select an item and use the ▲ or ▼ button to select its available option. When the cursor is placed, the
  • Sharp NP-UM383WL | Users Manual - Page 60
    Slide toolbar 4. Using the Viewer (1) (2) (3) (4) Menu (1) Display (2) Image display (3) Clockwise rotation (4) C ounterclockwise rotation Options - Description Closes the menu and switches to the slide screen. Closes the menu and displays the thumbnail screen. Closes the menu and starts
  • Sharp NP-UM383WL | Users Manual - Page 61
    5. Using On-Screen Menu ❶ Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT in the bottom show
  • Sharp NP-UM383WL | Users Manual - Page 62
    ❷ Menu Elements Tab Available buttons Source Highlight 5. Using On-Screen Menu Slide bar Solid triangle Radio button ECO mode symbol High Altitude symbol Thermometer symbol Off Timer remaining time Key Lock symbol Menu windows or dialog boxes typically have the following elements: Highlight
  • Sharp NP-UM383WL | Users Manual - Page 63
    5. Using On-Screen Menu ❸ List of Menu Items Some menu items are not available depending on the input source. Menu Item HDMI1 HDMI2 COMPUTER SOURCE VIDEO USB-A LAN PRESET GENERAL REFERENCE GAMMA CORRECTION SCREEN SIZE COLOR TEMPERATURE DYNAMIC CONTRAST IMAGE MODE DETAIL SETTINGS
  • Sharp NP-UM383WL | Users Manual - Page 64
    COLOR COLOR, MONOCHROME SOURCE DISPLAY ON OFF, ON ID DISPLAY ON OFF, ON MENU ECO MESSAGE OFF OFF, ON DISPLAY TIME AUTO 45 SEC MANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC BACKGROUND BLUE BLUE, BLACK, LOGO FILTER MESSAGE ORIENTATION CONTROL PANEL LOCK 2000[H] DESKTOP FRONT OFF OFF
  • Sharp NP-UM383WL | Users Manual - Page 65
    Menu Item LIGHT HOURS USED FILTER HOURS USED USAGE TIME TOTAL CARBON SAVINGS TOTAL COST SAVINGS SOURCE NAME SOURCE INDEX HORIZONTAL FREQUENCY SOURCE(1) VERTICAL FREQUENCY SYNC TYPE SYNC POLARITY SCAN TYPE SIGNAL TYPE VIDEO TYPE SOURCE(2) BIT DEPTH VIDEO LEVEL IP ADDRESS INFO SUBNET
  • Sharp NP-UM383WL | Users Manual - Page 66
    5. Using On-Screen Menu ❹ Menu Descriptions & Functions [SOURCE] HDMI1 and HDMI2 Selects the HDMI compatible equipment connected to your HDMI1 or 2 IN terminal. COMPUTER Selects the computer connected to your COMPUTER input terminal signal. NOTE: When the component input signal is connected to the
  • Sharp NP-UM383WL | Users Manual - Page 67
    5. Using On-Screen Menu ❺ Menu Descriptions & Functions [ADJUST] [PICTURE] [PRESET] This function allows you to select optimized settings for your projected image. You can adjust neutral tint for yellow, cyan or magenta. There are seven factory presets optimized for various types of images. You can
  • Sharp NP-UM383WL | Users Manual - Page 68
    5. Using On-Screen Menu [GENERAL] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 7]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE]. HIGH-BRIGHT Recommended for
  • Sharp NP-UM383WL | Users Manual - Page 69
    Enhancing the Color [COLOR ENHANCEMENT] This function allows you to enhance the color of image. ON Enhances the color. 5. Using On-Screen Menu NOTE: This function is available only when [PRESENTATION] is selected [REFERENCE]. Adjusting White Balance [WHITE BALANCE] This allows you to adjust the
  • Sharp NP-UM383WL | Users Manual - Page 70
    [IMAGE OPTIONS] 5. Using On-Screen Menu Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function .
  • Sharp NP-UM383WL | Users Manual - Page 71
    Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. 5. Using On-Screen Menu - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. - The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and
  • Sharp NP-UM383WL | Users Manual - Page 72
    the incoming signal and displays it in its appropriate aspect ratio. • This table shows typical resolutions and aspect ratios that most computers support. Resolution VGA 640 × 480 SVGA 800 × 600 XGA 1024 × 768 WXGA 1280 × 768 WXGA 1280 × 800 WXGA+ 1440 × 900 SXGA 1280 × 1024
  • Sharp NP-UM383WL | Users Manual - Page 73
    5. Using On-Screen Menu Sample image when the appropriate aspect ratio is automatically determined [Computer signal] Aspect ratio of incoming signal 4:3 5:4 16:9 15:9 16:10 Sample image when the appropriate aspect ratio is automatically determined [Video signal] Aspect ratio of incoming
  • Sharp NP-UM383WL | Users Manual - Page 74
    [AUDIO] 5. Using On-Screen Menu Turning Up or Down Sound Adjusts the volume of the projector speaker and AUDIO OUT (Stereo Mini Jack). TIP: • When no menus appear, the ◀ and ▶ buttons on the projector cabinet and the VOL. +/− buttons on the remote control work as a volume control. (→ page 24 ) 64
  • Sharp NP-UM383WL | Users Manual - Page 75
    [KEYSTONE] You can correct horizontal or vertical keystone, pincushion LEFT/RIGHT or TOP/BOTTOM, or cornerstone distortion manually. NOTE: • [KEYSTONE HORIZONTAL] and [KEYSTONE VERTICAL] can be adjusted at once. • To change from one item to another item, reset the first item. • Adjustment values
  • Sharp NP-UM383WL | Users Manual - Page 76
    Using the Wall Color Correction [WALL COLOR] 5. Using On-Screen Menu This function allows for quick adaptive color correction in applications where the screen material is not white. NOTE: Selecting [WHITEBOARD] reduces light brightness. [LIGHT MODE] Adjusting the energy savings settings and the
  • Sharp NP-UM383WL | Users Manual - Page 77
    3 MINUTES] message will be displayed on the bottom of the screen. Selecting Menu Language [LANGUAGE] You can choose one of 30 languages for on-screen instructions. NOTE: Your setting will not be affected even when [RESET] is done from the menu. 67
  • Sharp NP-UM383WL | Users Manual - Page 78
    option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the factory preset. Selecting a Color or Logo for Background [BACKGROUND] Use
  • Sharp NP-UM383WL | Users Manual - Page 79
    [INSTALLATION] 5. Using On-Screen Menu Selecting Projector Orientation [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. DESKTOP FRONT CEILING REAR
  • Sharp NP-UM383WL | Users Manual - Page 80
    the CONTROL ID setting� NOTE: • When [ON] is selected for [CONTROL ID], the projector cannot be operated by using the remote control that does not support the CONTROL ID function. (In this case the buttons on the projector cabinet can be used.) • Your setting will not be affected even when [RESET
  • Sharp NP-UM383WL | Users Manual - Page 81
    displayed. [OPTIONS(1)] Setting Auto Adjust [AUTO ADJUST] This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for noise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE]. OFF The computer signal will not be
  • Sharp NP-UM383WL | Users Manual - Page 82
    unable to detect. If this is the case, select [COMPONENT]. [VIDEO] This feature enables you to select composite video standards automatically or manually. Factory default setting is [AUTO] and the projector will automatically detect the video standard. In the case where the projector has difficult
  • Sharp NP-UM383WL | Users Manual - Page 83
    mode*. * Sleep mode refers the mode without functional restrictions by the [STANDBY MODE]. When [STANDBY MODE] → [NETWORK STANDBY] is selected - When [NETWORK SERVICE] → [AMX SETTINGS] → [ENABLE] is selected - When the signal is input to the computer, HDMI 1 IN or HDMI 2 IN terminals NOTE: • Even
  • Sharp NP-UM383WL | Users Manual - Page 84
    5. Using On-Screen Menu Turning On the Projector By Applying Computer Signal [AUTO POWER ON] When the projector is in Standby mode, applying a computer or HDMI signal from a computer connected to the COMPUTER IN input, HDMI1, or HDMI2 input will power on the projector and simultaneously project the
  • Sharp NP-UM383WL | Users Manual - Page 85
    5. Using On-Screen Menu Changing currency setting and currency convert setting [CURRENCY CONVERT] Changes currency setting and currency convert setting for CARBON METER. The initial setting are as follows: US Dollar 0.11 [$/kWh] EU Euro 0.19 [€/kWh] Japanese Yen 20 [¥/kWh] Chinese Yuan 0.48 [¥/
  • Sharp NP-UM383WL | Users Manual - Page 86
    5. Using On-Screen Menu Setting up the Projector for a Wired LAN Connection [WIRED LAN] Important • Consult with your network administrator about these settings. • When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projector. (→ page 92) TIP: The
  • Sharp NP-UM383WL | Users Manual - Page 87
    5. Using On-Screen Menu ❼ Menu Descriptions & Functions [INFO.] Displays the status of the current signal and light usage. This item has seven pages. The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LIGHT
  • Sharp NP-UM383WL | Users Manual - Page 88
    [SOURCE(2)] 5. Using On-Screen Menu [SIGNAL TYPE] [BIT DEPTH] [WIRED LAN] [VIDEO TYPE] [VIDEO LEVEL] [IP ADDRESS] [GATEWAY] [CONNECTION] [SUBNET MASK] [MAC ADDRESS] [PROJECTOR NAME] [WIRED LAN] [PIN CODE] [IP ADDRESS] 78
  • Sharp NP-UM383WL | Users Manual - Page 89
    [VERSION] [FIRMWARE] Version [DATA] Version [OTHERS] [PROJECTOR NAME] [HOST NAME] [MODEL NO.] [SERIAL NUMBER] [CONTROL ID] (when [CONTROL ID] is set) 5. Using On-Screen Menu 79
  • Sharp NP-UM383WL | Users Manual - Page 90
    5. Using On-Screen Menu ❽ Menu Descriptions & Functions [RESET] Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to
  • Sharp NP-UM383WL | Users Manual - Page 91
    6. Installation and Connections 1 Setting Up the Screen and the Projector The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is 70" (1778mm) measured diagonally when the projector is 3.2 inches (80 mm) between the screen side of the
  • Sharp NP-UM383WL | Users Manual - Page 92
    6. Installation and Connections WARNING • Installing your projector on the ceiling must be done by a qualified technician. Contact your NEC dealer for more information. • Do not attempt to install the projector yourself. • Only use your projector on a solid, level surface. If the projector falls to
  • Sharp NP-UM383WL | Users Manual - Page 93
    6. Installation and Connections Example of installation on a desktop The diagram below shows an example of when the projector is used on a desktop. Horizontal projection position: Equal distance to the left and right from the center of the lens Vertical projection position: (see table below) Center
  • Sharp NP-UM383WL | Users Manual - Page 94
    6. Installation and Connections Lens shifting range This projector is equipped with a lens shift function (→ page 16) for adjusting the image position using dials. Lens shifting is possible within the range shown below. NOTE: • In case lens shifted volume exceeds the below illustrated range, blur
  • Sharp NP-UM383WL | Users Manual - Page 95
    6. Installation and Connections (Example) When using to project on a 100" screen According to the "Tables of screen sizes and dimensions" (→ page 81), H = 84.8"/215.4 cm, V = 53.0"/134.6 cm. Adjustment range in the vertical direction: the projected image can be moved upwards 0.03 × 53"/134.6 cm ≈
  • Sharp NP-UM383WL | Users Manual - Page 96
    used to connect to a computer. The connection cable is not enclosed with the projector. Please get ready a suitable cable for the connection. NOTE: Signals supported by Plug & Play (DDC2) COMPUTER IN analog Yes INPUT HDMI 1 IN digital Yes HDMI 2 IN digital Yes HDMI 1 IN COMPUTER IN HDMI cable
  • Sharp NP-UM383WL | Users Manual - Page 97
    cable has been disconnected and then reconnected, an image may not be correctly displayed. Should this happen, restart your PC. • The COMPUTER video input terminals support Windows Plug and Play. • A Mac signal adapter (commercially available) may be required to connect a Mac computer. 87
  • Sharp NP-UM383WL | Users Manual - Page 98
    to your projector to simultaneously view on a monitor the computer analog image you're projecting. NOTE: • The AUDIO OUT jack does not support headphone terminal. • When audio equipment is connected, the projector speaker is disabled. • The signal output from the COMPUTER OUT of this projector
  • Sharp NP-UM383WL | Users Manual - Page 99
    Input terminal VIDEO IN SOURCE button on the projector cabinet VIDEO Button on the remote control (VIDEO) NOTE: Refer to your VCR owner's manual for more information about your equipment's video output requirements. NOTE: An image may not be displayed correctly when a Video source is played back
  • Sharp NP-UM383WL | Users Manual - Page 100
    projector. Input terminal COMPUTER IN SOURCE button on the projector cabinet COMPUTER Button on the remote control (COMPUTER 1) NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements. 90
  • Sharp NP-UM383WL | Users Manual - Page 101
    6. Installation and Connections Connecting HDMI Input You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the HDMI IN terminal of your projector. HDMI 1 IN HDMI 2 IN HDMI cable (not supplied) Use High Speed HDMI® Cable. Audio cable (not
  • Sharp NP-UM383WL | Users Manual - Page 102
    6. Installation and Connections Connecting to a Wired LAN The projector comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable. To use a LAN connection, you are required to set the LAN on the projector menu. Select [SETUP] → [WIRED LAN]. (→ page 76). Example of LAN
  • Sharp NP-UM383WL | Users Manual - Page 103
    7. Maintenance This section describes the simple maintenance procedures you should follow to clean the filter, the projection window, and the cabinet. ❶ Cleaning the Filters The filter at the intake vent keeps dust and dirt from getting inside the projector. If the filter is dirty or clogged, your
  • Sharp NP-UM383WL | Users Manual - Page 104
    3. Put the filter cover back to the projector cabinet. Keep to push the filter cover frame around the buttons until a "click" sound is heard. The filter cover will be secured in position. 7. Maintenance 4. Clear the filter usage hours. Plug the power cord into the wall outlet, and then turn on the
  • Sharp NP-UM383WL | Users Manual - Page 105
    7. Maintenance ❷ Cleaning the Projection Window • Turn off the projector before cleaning. • Do not scratch or mar the projection windows as it is made of glass. • Use a blower or lens paper to clean the projection window, and be careful not to scratch or mar the glass sur- face. WARNING • Do not use
  • Sharp NP-UM383WL | Users Manual - Page 106
    8. Appendix ❶ Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Feature of each indicator ① ②③ ① POWER indicator This indicator informs the power status of the projector. ②
  • Sharp NP-UM383WL | Users Manual - Page 107
    (In the Forced ECO) Blue Off Orange (Light) (Light) Temperature problem Red Off Off (Blink*4) Red (Blink*4) Red (Light) Green (Light) Status varies Red (Light) Error requiring service support Status varies Procedure The projector's keys are locked. The setting must be canceled
  • Sharp NP-UM383WL | Users Manual - Page 108
    Explanation on the POWER indicator and standby state 8. Appendix In the state the selected STANBY MODE is NETWORK STANDBY. Available ports in each state (○: Available, ×: Unavailable) LAN PC CONTROL Indicator : Lights in blue Powerd On state Power Off Power On Power consumption High ○ ○
  • Sharp NP-UM383WL | Users Manual - Page 109
    In the state the selected STANBY MODE is NORMAL. Indicator : Lights in blue Powered ON state Power Off 8. Appendix Available ports in each state (○: Available, ×: Unavailable) LAN PC CONTROL Power consumption High ○ ○ Power On Indicator : Lights in green Sleep state No operation/No signal
  • Sharp NP-UM383WL | Users Manual - Page 110
    "Power/Status/Light Indicator" on page 96.) Problem Check These Items Does not turn on or shut Make sure that the resolution y ou are trying to display is supported by the projector� (→ page 106) • Adjust the computer image manually with the Horizontal/Vertical in the [IMAGE OPTIONS]. (→ page 61)
  • Sharp NP-UM383WL | Users Manual - Page 111
    the changes to take affect. For setting display modes other than those supported by your Mac and the projector, changing the DIP switch on 1024 × 768 unless "mirroring" is off on your MacBook. Refer to owner's manual supplied with your Mac computer for mirroring. • Folders or icons are hidden on the
  • Sharp NP-UM383WL | Users Manual - Page 112
    LCD with Micro Lens Array ( Aspect Ratio 16: 10 ) 1280×800 pixels (WXGA) F = 1.78-1.83 f = 4.92-5.18mm Zoom Focus Digital Zoom and Manual Manual Light Lens shifting H: ±2%, V: ±3% HLD + LED ECO MODE OFF 340W NORMAL 272W ECO Light Output*2*3 NORMAL 170W 3800 lumens 80% ECO Contrast Ratio
  • Sharp NP-UM383WL | Users Manual - Page 113
    Component (D-SUB 15 P), 2 × HDMI Type A (19P, HDMI® Terminal) HDCP supported*4, Outputs PC Contral Wired LAN Port 1 × Video (RCA), 1 × (L/R) 15 P), 1 × Stereo Mini Audio 1 × PC Control Port (D-Sub 9 P), 1 × SERVICE Port (Type: USB-B) 1 × RJ-45 (10BASE-T/100BASE-TX) USB Port Color Reproduction
  • Sharp NP-UM383WL | Users Manual - Page 114
    ❸ Cabinet Dimensions Unit: mm (inch) 8. Appendix 449(17.7) 117.6(4.6) 134.7(5.3) 425(16.7) 270(10.6) 180(7.1) 153.2(6.0) 153.2(6.0) 156.7(6.2) 14.4(0.6) 200(7.9) 333(13.1) 46.3(1.8) 330(13) 104
  • Sharp NP-UM383WL | Users Manual - Page 115
    ❹ Pin Assignments of D-Sub COMPUTER Input Terminal Mini D-Sub 15 Pin Terminal 8. Appendix 11 12 13 14 15 6 7 8 9 10 1 23 45 Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RGB Signal (Analog) Red Green or Sync on Green Blue Ground
  • Sharp NP-UM383WL | Users Manual - Page 116
    than the projector's native resolution (1280 × 800) will be displayed with Advanced AccuBlend. • Sync on Green and Composite sync signals are not supported. • Signals other than those specified in the table above may not be displayed correctly. If this should happen, change the refresh rate or
  • Sharp NP-UM383WL | Users Manual - Page 117
    6 PC Control Codes and Cable Connection PC Control Codes Function POWER ON POWER OFF INPUT SELECT COMPUTER INPUT SELECT HDMI1 INPUT SELECT HDMI2 INPUT SELECT VIDEO INPUT SELECT USB-A INPUT SELECT LAN PICTURE MUTE ON PICTURE MUTE OFF SOUND MUTE ON SOUND MUTE OFF Code Data 02H 00H 00H 00H 00H 02H
  • Sharp NP-UM383WL | Users Manual - Page 118
    : 256 colors or less TIP: • Virtual Remote Tool can be used with a LAN and a serial connection. • The projector's COMPUTER IN terminal supports DDC/CI (Display Data Channel Command Interface). DDC/CI is a standard interface for bidirectional communication between display/projector and computer. 108
  • Sharp NP-UM383WL | Users Manual - Page 119
    service personnel, check the following list to be sure repairs are needed also by referring to the "Troubleshooting" section in your user's manual. This checklist below will help us solve your problem . □ Input source's resolution and frequency are supported by the projector. □ Image is too dark
  • Sharp NP-UM383WL | Users Manual - Page 120
    In the space below please describe your problem in detail. 8. Appendix Information on application and environment where your projector is used Projector □ OFF □ AUTO ECO □ NORMAL □ ECO Information on input signal: Horizontal synch
  • Sharp NP-UM383WL | Users Manual - Page 121
    take time to register your new projector. This will activate your limited parts and labor warranty and InstaCare service program. Visit our web site at www.necdisplay.com, click on support center/register product and submit your completed form online. Upon receipt, we will send a confi mation letter
  • Sharp NP-UM383WL | Users Manual - Page 122
    © NEC Display Solutions, Ltd. 2019 7N952943
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
Projector
UM383WL
User’s Manual
Please visit our web site for User’s Manual in the latest version:
Model No.
NP-
UM383WL