Sharp NP-UM383WL Users Manual - Page 12
(2) Introduction to the Projector, Features you’ll enjoy:, Introduction
View all Sharp NP-UM383WL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
❷ Introduction to the Projector This section introduces you to your new projector and describes the features and controls. 1. Introduction Features you'll enjoy: • Ultra short throw distances Ultra short focal lenses provide for a larger image using a shorter throw distance when compared to a typical projector lens. Max 130", throw distance: 42.9 cm/17 inches (The throw distance refers to the distance between the screen and the screen side of the projector) • Quick start (6 seconds*1), Quick Power Off, Direct Power Off 6 seconds*1 after turning on the power, the projector is ready to display PC or video images. The projector can be put away immediately after the projector is powered down. No cool down period is required after the projector is turned off from the remote control or cabinet control panel. The projector has a feature called "Direct Power Off". This feature allows the projector to be turned off (even when projecting an image) by using the Main Power Switch or disconnecting the AC power supply. To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and a breaker. *1 The quick start time is only when [STANDBY MODE] is set to [NETWORK STANDBY] in the on-screen message. • Tilt-free This projector can be set to any angle within a vertical 360° range. • 0.26 W (100-130 V AC)/0.39 W (200-240 V AC) in standby condition with energy saving technology Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode that consumes only 0.26 W (100-130 V AC)/0.39 W (200-240 V AC). • Carbon Meter This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector's [ECO MODE] is set to [AUTO ECO], [NORMAL], or [ECO]. The amount of CO2 emission reduction will be displayed in the confirmation message at the time of power-off and in the INFO of the on-screen menu. • High color gamut The projector adopts HLD+LED new solid light source and optical components that can improve color reproducibility. The reproducible color gamut is greatly expanded compared to traditional lamp projectors (when [ADJUST] - [PICTURE] - [PRESET] is set to [GRAPHIC] ). • HLD+LED new light source with 20,000 hours long life With a brightness of 3,800 lumens and an ultra long life of up to 20,000 hours, it maintains brightness of the display throughout the life. • Wide range of input terminals (HDMI × 2) The projector is equipped with a variety of input terminals: HDMI (× 2), Computer (analog), Video. HDMI input terminal on this product supports HDCP. • Compatible with the MultiPresenter application This projector is compatible with the NEC MultiPresenter application, so multi-screen projection is possible via the network (wired LAN). • 2 ×10 W built-in speaker for an integrated audio solution Two powerful 10 watt stereo speakers are built in. 2