Sharp NP-UM383WL Users Manual - Page 71
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL], Selecting Overscan Percentage [OVERSCAN]
View all Sharp NP-UM383WL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. 5. Using On-Screen Menu - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. - The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the cur- rent signal. The next time you project the signal with the same resolution, horizontal and vertical frequency, its adjustments will be called up and applied. To delete adjustments stored in memory, from the menu, you select [RESET] → [CURRENT SIGNAL] or [ALL DATA] and reset the adjustments. Selecting Overscan Percentage [OVERSCAN] Select overscan percentage (AUTO, 0%, 5% and 10%) for signal. Projected image Overscaned by 10% NOTE: • The [0[%]] cannot be selected when VIDEO signal is used. • The [OVERSCAN] item is not available: - when [NATIVE] is selected for [ASPECT RATIO]. 61