Sharp PG A20X Operation Manual - Page 40

Picture Adjustment You can adjust the projector's picture to your preferences using the "Picture" menu. For operation of the menu screen, see pages 32 to 35. Example: "Picture" screen menu for INPUT 1 (RGB) mode Adjusting the Image Select the item on the "Picture" menu and adjust the image. Description of Adjustment Items Selectable items Press \ Press | Contrast for less contrast. for more contrast. Bright for less brightness. for more brightness. Color for less color intensity. for more color intensity. Tint for making skin tones purplish. for making skin tones greenish. Sharp for less sharpness. for more sharpness. Red for weaker red. for stronger red. Blue for weaker blue. for stronger blue. CLR Temp (Adjusting the Color Temperature) Select "CLR Temp" on the "Picture" menu and the desired color temperature setting. Description of Color Temperature Settings Selectable settings 5500K 6500K 7500K 8500K 9300K 10500K Description For lower color temperature for warmer, reddish incandescent-like images. For higher color temperature for cooler, bluish, fluorescent-like images. Note • "Color", "Tint" and "Sharp" are not displayed when selecting INPUT 1 and setting the "Signal Type" to "RGB" or setting the "Signal Type" to "Auto" and the input signal is recognized as an RGB signal. • "Sharp" can be adjusted when 480I, 480P, 540P, 580I, 580P, 720P, 1035I or 1080I signals are detected while "Signal Type" for INPUT 1 is set to "Component" or set to "Auto" and the input signal is recognized as a component signal. • To reset all adjustment items, select "Reset" and press . Note • Values for "CLR Temp" are only approximations. -36 PG-A20X_E_PDF_P32_39.p65 36 03.4.23, 9:57 AM