Sharp PG A20X Operation Manual - Page 44

Picture Display Mode This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose "NORMAL", "DOT BY DOT", "BORDER" or "STRETCH" image. Switching the Picture Display Mode Press . • Pressing changes the display as shown on pages 40 and 41. • To return to the standard image, press "RESIZE" is displayed on the screen. while UNDO button RESIZE button COMPUTER 4:3 aspect ratio Other aspect ratios SVGA (800 × 600) XGA (1024 × 768) SXGA (1280 × 960) SXGA+ (1400 × 1050) SXGA (1280 × 1024) 1280 × 720 NORMAL 1024 × 768 960 × 768 - DOT BY DOT 800 × 600 - 1280 × 960 1400 × 1050 1280 × 1024 - BORDER 768 × 576 720 × 576 - STRETCH 1024 × 576 960 × 576 1024 × 576 Input Signal Computer Image type Resolution lower than XGA 4:3 aspect ratio XGA Output screen image NORMAL Projects a full screen image while maintaining the aspect ratio. DOT BY DOT Projects the original resolution signal of the image. BORDER STRETCH Projects 4:3 image fully Projects 16:9 image in STRETCH (the following evenly over entire screen column) image. (top/bottom blank bands). * * * * * 4:3 aspect ratio * * Resolution higher than XGA 4:3 aspect ratio * * SXGA (1280 × 1024) 5:4 aspect ratio * 1280 × 720 16:9 aspect ratio * Mode for projecting an image with the original aspect ratio without cutting any portions. : Cutout area on which images cannot be projected. : Area where the signals are off screen. -40 PG-A20X_E_PDF_P40_50.p65 40 03.4.23, 9:58 AM