Sharp PG A20X Operation Manual - Page 57
Replacing the Air Filter - remote replacement
UPC - 074000364004
View all Sharp PG A20X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Replacing the Air Filter • This projector is equipped with air filters to ensure the optimal operating condition of the projector. • The air filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location. • Ask your nearest Sharp Authorized Projector Dealer or Service Center to exchange the filter (PFILDA008WJZZ) when it is no longer possible to clean. Cleaning and Replacing the Air Filter 1 Press STANDBY on the projector STANDBY or on the remote control to put the projector into the standby mode. • Wait until the cooling fan stops. " Bottom view " Rear view Air filter Air filter Air filter (not removable) (not removable) STANDBY button STANDBY button 2 Disconnect the power cord. • Unplug the power cord from the AC socket. 3 Remove the filter/lamp unit cover. • Turn the projector over. Loosen the user service screw (1) that secures the filter/lamp unit cover. Pressing the tab (2), remove the filter/lamp unit cover (3). 4 Remove the air filter. • Pick the air filter up with your fingers and lift it out of the filter/lamp unit cover. AC socket 1 3 User service screw 2 Tab Appendix PG-A20X_E_PDF_P51_62.p65 53 03.4.23, 9:59 AM -53