Sharp PG-B10S Operation Manual - Page 44
Auto Sync (Auto Sync Adjustment), Signal Info (Checking the Input Signal)
UPC - 074000364080
View all Sharp PG-B10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Computer Image Adjustment Auto Sync (Auto Sync Adjust- ment) Used to automatically adjust a computer image. Select "Auto Sync" on the "Fine Sync" menu and set it to " "(ON) or " "(OFF). Setting the menu screen Page 34 Example: "Fine Sync" menu screen for INPUT 1 mode Signal Info (Checking the Input Signal) Select "Signal Info" on the "Fine Sync" menu to check the current input signal information. Checking the menu screen Page 34 Example: "Fine Sync" menu screen for INPUT 1 mode Description of Auto Sync Adjustment Selectable Settings Description ON OFF Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched, when connected to a computer. Auto Sync adjustment is not automatically performed. Note • Auto Sync adjustment is also performed by pressing on the projector or on the remote control. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjust- ments. (See page 39.) Note • The projector will display the number of scanned lines available from audio-visual equipment such as a DVD player or Digital Video. -40