Sharp PG-B10S Operation Manual - Page 62
Projecting a Reversed Image - upside down
UPC - 074000364080
View all Sharp PG-B10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Setting up the Screen Projecting a Reversed Image Projection from behind the Screen I Place a translucent screen between the projector and the audience. I Reverse the image by setting "Rear" in the "PRJ Mode" menu. (See page 49.) When the image is projected from behind the screen using the default setting. MOn-screen Display Audience Translucent screen Projection Using a Mirror I Place a mirror (normal flat type) in front of the lens. I When the translucent screen is placed on between the mir- ror and audience, set to "Front" in the "PRJ Mode" menu. (See page 49.) I When the mirror is placed on the audience side, set to "Rear" in the "PRJ Mode" menu. (See page 49.) Set to "Front" Mirror Set to "Rear" Set to "Rear". MOn-screen Display Audience Info Translucent screen Audience Mirror • When using a mirror, be sure to carefully position both the projector and the mirror so the light does not shine into the eyes of the audience. Ceiling-mount Setup I It is recommended that you use the optional Sharp ceilingmount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately). • AN-B10T ceiling-mount bracket, its AN-TK201 and AN-TK202 extension tubes (for countries other than the U.S.A.). I Be sure to adjust the position of the projector to match the distance (H) from the lens center position (see page 57) to the lower edge of the image, when mounting the projector on the ceiling. I Do not mount the projector upside down. -58 The image is reversed.