Sharp PG-B10S Operation Manual - Page 50
Anti-Theft (Setting the Anti-Theft), to enter
UPC - 074000364080
View all Sharp PG-B10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Using the "Options" Menu Anti-Theft (Setting the Anti-Theft) The anti-theft function prevents unauthorized use of the projector. You can choose to use this function or not. If you do not want to use this function, just do not enter the keycode. Once the anti-theft function is activated, users will need to enter the correct keycode each time the projector is turned on. Failure to enter the correct keycode will cause images to not be projected. The following procedures explain how to use this function. Setting the menu screen Page 34 Example: "Options" menu screen for INPUT 2 (S-Video) mode If you want to set the keycode, follow the procedure below. 1 Select "Anti-Theft" on the "Op- tions" menu, then press . • The password input box will appear. 2 Press ', " and | to enter the password. • The keycode input box will appear. " On-screen display (keycode) -46 3 Press any button you like on the re- mote control or projector to set the first digit in "New Code". Note • The following buttons on the remote control and projector cannot be set as keycodes: • ON button • STANDBY button • ENTER button • UNDO button • MENU button • FORWARD button • BACK button 4 Enter the remaining 3 digits by pressing any buttons you like. 5 Enter the same keycode once more in "Reconfirm". Note When "Anti-Theft" is set, the keycode inputting box appears after the power is turned on. When it appears, enter the right keycode. • Press the buttons on the remote control if the buttons on the remote control are used for setting the keycode. In the same manner, press the buttons on the projector if the buttons on the projector are used for setting the keycode. •"Anti-Theft" cannot be selected unless "Password" is set. (See page 45.) • When "Anti-Theft" is selected, the password input box will appear. Enter the keycode after the right password is entered. Info • Once the function is activated, you must remember the correct keycode. We suggest you record the keycode in a safe place where only authorized users have access. If you lose or forget your keycode, you will need to contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 73). You may need to bring your projector to them to restore the projector to original factory condition (password and keycode reset).