Sharp PG-C20XE Operation Manual - Page 31
Computer Image Adjustments (INPUT 1 mode only), Auto Sync Adjustment
![]() |
View all Sharp PG-C20XE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Computer Image Adjustments (INPUT 1 mode only) Projector ON/OFF POWER LAMP TEMP. KEYSTONE INPUT AUTO SYNC BACK ENTER MENU Remote control 1 On-screen Display Auto Sync Adjustment • Used to automatically adjust a computer image. • Auto Sync adjustment can be made manually by pressing AUTO SYNC. • The sync adjustment is automatically made each time the projector is turned on while connected to a computer or the input selection is changed. 1 Press AUTO SYNC. During Auto Sync adjustment, "Adjusting The Image" is displayed as shown on the left. • Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 29.) Operation 28
![](/manual_guide/products/sharp-pgc20xe-operation-manual-1f80f85/31.png)