Sharp PG-C20XE Operation Manual - Page 32
Adjusting the Computer Image, Description of Adjustment Items
View all Sharp PG-C20XE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Computer Image Adjustments (INPUT 1 mode only) Projector Remote control ON/OFF POWER LAMP TEMP. KEYSTONE INPUT AUTO SYNC BACK ENTER MENU 2, 3, 4 2, 3 1, 5 (GUI) On-screen Display Adjusting the Computer Image When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur, adjust "Clock", "Phase", "H-Pos" and "V-Pos" for the optimum computer image. Description of Adjustment Items Selected item Clock Phase H-Pos V-Pos Description Adjusts vertical noise. Adjusts horizontal noise (similar to tracking on your VCR). Centres the on-screen image by moving it to the left or right. Centres the on-screen image by moving it up or down. • Computer image adjustments can be made easily by pressing AUTO SYNC ( ). See page 28 for details. (Select the desired computer input mode with INPUT.) 1 Press MENU. 2 Press ∂/ƒ to select "Fine Sync", and then press ENTER. 3 Press ∂/ƒ to select a specific adjustment item, and then press ENTER. 4 Press ∂/ƒ to move the mark of the selected adjustment item to the desired setting. 5 To exit from the GUI, press MENU. • To reset all adjustment items, select "Reset" on the "Fine Sync" menu screen and press ENTER. Operation 29