Sharp PG-C20XE Operation Manual - Page 45
Using the Kensington Lock, Troubleshooting
View all Sharp PG-C20XE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Using the Kensington Lock Kensington Security Standard connector This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector. Troubleshooting Problem No picture and no sound. Sound is heard but no picture appears. Colour is faded or poor. Picture is blurred. Picture appears but no sound is heard. An unusual sound is occasionally heard from the cabinet. Maintenance indicator illuminates. Picture noise appears. 480P images do not appear. Check • Projector power cord is not plugged into the wall outlet. • The filter cover is not securely installed. • Selected input is wrong. (See page 17.) • Cables incorrectly connected to side and rear panels of the projector. (See pages 12-15.) • Remote control batteries have run down. (See page 9.) • Cables incorrectly connected to side and rear panels of the projector. (See pages 12-15.) • "Contrast" and "Bright" adjustments are set to minimum position. (See page 27.) • "Color" and "Tint" adjustments are not correct. (See page 27.) • Adjust the focus. (See page 17.) • Projection distance is too long or too short to allow for proper focus. (See page 18.) • Cables incorrectly connected to side and rear panels of the projector. (See pages 12-15.) • Volume is set to minimum. (See page 17.) • If the picture is normal, the sound is due to cabinet shrinkage caused by temperature changes. This will not affect operation or performance. • Refer to "Lamp/Maintenance Indicators" on page 39. • Adjust the "Phase" setting. (See page 29.) • Set the resolution mode to 480P. (See page 36.) Maintenance & Troubleshooting 42