Sharp PN-H801 Operation Manual

Sharp PN-H801 Manual

Get Sharp PN-H801 PDF manuals and user guides View all Sharp PN-H801 manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PN-H801 manual content summary:

  • Sharp PN-H801 | Operation Manual - Page 1
    PN-H801 LCD MONITOR OPERATION MANUAL
  • Sharp PN-H801 | Operation Manual - Page 2
    IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY
  • Sharp PN-H801 | Operation Manual - Page 3
    is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
  • Sharp PN-H801 | Operation Manual - Page 4
    SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual
  • Sharp PN-H801 | Operation Manual - Page 5
    order to avoid these problems, make sure to observe according to the instructions in the compartment. interference in which case the user may be required to take adequate support the monitor. • Ensuring the monitor is not overhanging the edge of the supporting furniture. • Not placing the monitor
  • Sharp PN-H801 | Operation Manual - Page 6
    block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way
  • Sharp PN-H801 | Operation Manual - Page 7
    INSTRUCTIONS - The TFT color LCD panel used in this monitor the monitor from an authorized SHARP servicing dealer or service center. - When using the monitor in it is broken or malfunctioning. Refer the servicing to the service representative. Manual Scope - Microsoft, Windows and Internet
  • Sharp PN-H801 | Operation Manual - Page 8
    measures to keep the ambient temperature within the required range. • Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. • Do not block any
  • Sharp PN-H801 | Operation Manual - Page 9
    33 Controlling the Monitor with a PC (LAN 36 Settings to connect to a LAN 36 Command-based control 37 Troubleshooting 38 Specifications 39 Intellectual Property Rights and Other Matters that Apply to This Software 44 Mounting Precautions (For SHARP dealers and service engineers 52 Supplied
  • Sharp PN-H801 | Operation Manual - Page 10
    nFront view Part Names Accessing the operation panel 1 23 45 1. LCD panel 2. Remote control sensor (See page 16.) 3. Input switch (See page 18.) 4. Power switch (See page 17.) 5. Power LED (See page 17.) TIPS • Use a pointed object such as a pen tip to press the switches. nRear view 1 17 17 3 4
  • Sharp PN-H801 | Operation Manual - Page 11
    nRemote control unit 1 2 7 3 8 4 9 10 5 11 6 Part Names 1. Signal transmitter 2. POWER button (See page 17.) 3. MUTE button (See page 18.) 4. VOL +/- buttons (See page 18.) Cursor control ( / / / ) buttons 5. DISPLAY/F1 button (See page 18.) 6. MODE/F2 button (See page 18.) 7. INPUT
  • Sharp PN-H801 | Operation Manual - Page 12
    / disconnecting cables. Also, read the manual of the equipment to be connected. terminals may cause malfunctions and the other problems. • Do not use any cable that monitor while charging the smartphone. When a MHL is connect, the input is automatically switched to HDMI4. This product supports
  • Sharp PN-H801 | Operation Manual - Page 13
    flash drive to the USB port. • Do not connect a USB device other than a USB flash drive. • Turn off the power of the monitor when removing a USB flash drive. Supported USB flash drives File System Capacity FAT32 Up to 32 GB (maximum file size 2 GB) • Do not use a USB flash drive with a security
  • Sharp PN-H801 | Operation Manual - Page 14
    power cord) Removing the Handles The handles can be removed. Handle Handle screws Caution • The removable handles and handle screws are for use with this monitor. Do not use them for any other devices. • To attach handles, be sure to use the handles and handle screws which were removed from this
  • Sharp PN-H801 | Operation Manual - Page 15
    Cable clamp attachment Cable Setting the USB flash drive cover 1. Insert the USB flash drive into the USB port. 2. Remove the screw from the monitor, attach the USB flash drive cover, and fasten with the screw that you removed. USB port Screw Caution • Do not tighten the screw excessively
  • Sharp PN-H801 | Operation Manual - Page 16
    and slide it in the direction of the arrow. 2. See the instructions in the compartment and put in the supplied batteries (LR-6 ("AA toward the remote control sensor on the front of the monitor. For the monitor in landscape orientation For the monitor in portrait orientation 10º 10º 16.4 feet (5m
  • Sharp PN-H801 | Operation Manual - Page 17
    may result in a malfunction. TIPS • When the main power switch is off, the monitor cannot be turned on. • In the input signal waiting mode, the power turns on on" state is entered) by signal input only when INPUT SIGNAL ON in MONITOR menu is set to YES and a when signal is input into the currently
  • Sharp PN-H801 | Operation Manual - Page 18
    to enter. * You can select the input mode that shows SELECTABLE. * You can select the input mode by pressing the input switch of the monitor. Video and audio input terminals for each input mode are shown below. Input mode Video Audio HDMI1 HDMI1 input terminal HDMI1 input terminal HDMI2 HDMI3
  • Sharp PN-H801 | Operation Manual - Page 19
    viewed with the whole screen using the screen-size switching function of this monitor, the edge of the image may be lost or appear distorted. If select the optimal screen size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the edges
  • Sharp PN-H801 | Operation Manual - Page 20
    Playing files You can play photo, music, and video files in a USB flash drive connected to the monitor, or photo files in internal memory. For information on USB flash drive, see page 13. n Supported formats The types of files that can be played are as follows. The operation of formats not
  • Sharp PN-H801 | Operation Manual - Page 21
    can copy photo files from a USB flash drive to internal memory and play the files. 1. Insert the USB flash drive into a USB port on the monitor. (See page 13.) 2. Set the media to USB flash drive. (See page 20.) 3. Select PHOTO with or and press . ENTER 4. Select the folder that contains
  • Sharp PN-H801 | Operation Manual - Page 22
    Auto play starts. • EXTERNAL STORAGE Connect a USB flash drive (see page 13) and turn on the monitor power. Auto play starts. You can connect a USB flash drive (see page 13) after turning on the monitor power. Auto play starts. TIPS • Photos and video cannot be played automatically at the same time
  • Sharp PN-H801 | Operation Manual - Page 23
    Playing files Function menu Press DISPLAY (F1) while each screen is displayed. Select an item with or and press . ENTER n Photo files Photo file is selected VOLUME SETTING Adjust the volume with or . COPY PHOTO Copy photo files from a USB flash drive to the internal memory. (See page 21.)
  • Sharp PN-H801 | Operation Manual - Page 24
    Menu Items Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 25 to 28 for details of each menu items. nMenu screen display 1 MENU Caution • Do not turn the main power switch off while
  • Sharp PN-H801 | Operation Manual - Page 25
    the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta. COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. COLOR ADJUSTMENT C.M.S.-HUE Adjusts color tone with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and
  • Sharp PN-H801 | Operation Manual - Page 26
    Menu Items ADVANCED QUICK SHOOT ADVANCED(HIGH), ADVANCED(LOW Using interpolation, this shows video that is normally shown at 60 frames/sec at 120 frames/sec for a smoother picture. However, this may distort the picture of some videos. In this case, set to STANDARD or OFF. STANDARD This makes
  • Sharp PN-H801 | Operation Manual - Page 27
    AUDIO RETURN CHANNEL cannot be selected. AUTO POWER ON Sets whether the monitor power turns on when the power of an external device is turned on. audio output (optical) terminal. When connecting a device that does not support AAC / Dolby Digital to the digital audio output (optical) terminal,
  • Sharp PN-H801 | Operation Manual - Page 28
    standby mode is reduced. Note, however that, more power will be consumed in standby mode. When ON is selected, current consumption is reduced while the monitor is in standby mode. Note, however, that the startup time from standby mode becomes longer. If set to ON, control via LAN cannot be performed
  • Sharp PN-H801 | Operation Manual - Page 29
    CD- ROM drive. 2. Open [CD Drive] in [Computer]. 3. Double-click [Adj_uty.exe]. The adjustment pattern will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's keyboard to quit the adjustment program. 5. Eject the CD-ROM from the CD
  • Sharp PN-H801 | Operation Manual - Page 30
    Disables the power button on the remote control unit. RC LOCK You can disable the remote control buttons other than power button. MONITOR LOCK You can disable the monitor switches other than power switch. MENU LOCK MENU You can disable use of the remote control with . ON SCREEN DISPLAY Shows/hides
  • Sharp PN-H801 | Operation Manual - Page 31
    bit 9600 bps 8 bits None Stop bit 1 bit Flow control None Communication procedure nCommand format When a command is sent from the PC to the monitor, the monitor operates according to the received command and sends a response message to the PC. Return code C1 C2 C3 C4 P1 P2 P3 P4 Command field
  • Sharp PN-H801 | Operation Manual - Page 32
    (0DH, 0AH) TIPS • "ERR" is returned when there is no relevant command or when the command cannot be used in the current state of the monitor. "ERR" is also returned when return code only is sent without any command. • If communication has not been established for reasons such as a bad connection
  • Sharp PN-H801 | Operation Manual - Page 33
    Controlling the Monitor with a PC (RS-232C) Control command table How to read the command 5 6 Command Direction AVMD W R Parameter 0 1 2 3 6 7 9 11 20 BRIGHT CONTRAST BLACK LEVEL TINT COLORS SHARPNESS VLMP WR CONT WR BLVL WR TINT WR COLR WR SHRP WR -16-16 0-40 -30-30 -30-30 -30-30
  • Sharp PN-H801 | Operation Manual - Page 34
    standby mode. -88-90 Varies depending on the signal. -26-36 Varies depending on the signal. -90-90 Varies depending on the signal. -20-20 MONITOR menu Function OFF IF NO OPERATION OFF IF NO SIGNAL INPUT SIGNAL ON Command Direction NOPO WR NSPO WR ISWM WR Parameter 0-12 0-1 0-1 Reply 0-12
  • Sharp PN-H801 | Operation Manual - Page 35
    Controlling the Monitor with a PC (RS-232C) Others Function SCREEN SIZE VOLUME Remote control unit MUTE MODEL Command Direction WIDE W R VOLM WR IRCO W MUTE W R MNRD W Parameter 0-1, 4-5, 8-9 0-100 113
  • Sharp PN-H801 | Operation Manual - Page 36
    available, straight) TIPS • You must assign an IP address to the monitor by following the procedures in "Settings to connect to a LAN". (See the description on the right.) • To control the monitor via LAN, set IP CONTROL SETUP to ENABLE. (See page 37.) • You
  • Sharp PN-H801 | Operation Manual - Page 37
    and other appropriate applications. Read the manual for the terminal software for detailed instructions. (1) Connect the PC to the monitor. Use a commercially available LAN cable to connect a PC to the monitor. (See page 36.) (2) Send commands to control the monitor. • The commands used are the same
  • Sharp PN-H801 | Operation Manual - Page 38
    problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? (See page 14.) • Is the main power switch off? (See page 17.) • Is the monitor HDMI1 - 3 input terminals support 3840 x 2160 (60Hz)
  • Sharp PN-H801 | Operation Manual - Page 39
    Specifications nProduct Specifications Model PN-H801 LCD component 80" Class [80-1/2 inch (204.4cm) diagonal] TFT LCD ) *1 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition
  • Sharp PN-H801 | Operation Manual - Page 40
    , be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws. (See page 52.) Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious
  • Sharp PN-H801 | Operation Manual - Page 41
    3840 × 2160 Hsync 67.5kHz 135.0kHz Vsync 30Hz 60Hz Dot frequency 297.0MHz 594.0MHz HDMI1-3 Yes (8bit) Yes (8bit) HDMI4 Yes (8bit) - Remarks Supports RGB 4:4:4 full-range output. YCbCr is not
  • Sharp PN-H801 | Operation Manual - Page 42
    DDC (Display Data Channel) standard. DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play
  • Sharp PN-H801 | Operation Manual - Page 43
    nHDMI input terminal pins (HDMITM Connector) No. Function 1 TMDS data 2+ 2 TMDS data 2 shield 3 TMDS data 2- 4 TMDS data 1+ 5 TMDS data 1 shield 6 TMDS data 1- 7 TMDS data 0+ 8 TMDS data 0 shield 9 TMDS data 0- 10 TMDS clock+ No. Function 11 TMDS clock shield 12 TMDS clock- 13 CEC
  • Sharp PN-H801 | Operation Manual - Page 44
    following website: http://www.sharp.co.jp/business/lcd-display/support/download/ source_e.html We are monitor Requirement to display license The copyrights of some software components incorporated in the monitor LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
  • Sharp PN-H801 | Operation Manual - Page 45
    DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Keith Packard not be used
  • Sharp PN-H801 | Operation Manual - Page 46
    notice(s) and this permission notice appear in supporting documentation. THE SOFTWARE IS PROVIDED "AS IS NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; make sure the software is free for all its users. This General Public License applies to most of the
  • Sharp PN-H801 | Operation Manual - Page 47
    price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service the original, so that any problems introduced by others will not users may redistribute the program under these conditions, and telling the user
  • Sharp PN-H801 | Operation Manual - Page 48
    may differ in detail to address new problems or concerns. Each version is given . Our decision will be guided by the two goals of ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN for all its users. This license, to freedom of use, not price. Our General Public Licenses are
  • Sharp PN-H801 | Operation Manual - Page 49
    version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library
  • Sharp PN-H801 | Operation Manual - Page 50
    valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a , but may differ in detail to address new problems or concerns. Each version is given a distinguishing exceptions for this. Our decision will be guided by the two goals of preserving the
  • Sharp PN-H801 | Operation Manual - Page 51
    RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY
  • Sharp PN-H801 | Operation Manual - Page 52
    Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 3 people. • Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor is designed to be installed on
  • Sharp PN-H801 | Operation Manual - Page 53
    PN-H801 Mu EN15M(1)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
PN-H801
LCD MONITOR
OPERATION MANUAL