Sharp PN-H801 Operation Manual - Page 15
Binding Cables, Setting the USB flash drive cover
 |
View all Sharp PN-H801 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Binding Cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. *1 Cable Cable clamp attachment Cable clamp *1 *1 *1 *1 *1 *3 *1 *1 *1 *2 *2 Cable clamp (insertion type) *3 Cable clamp (for power cord) Cable clamp attachment Cable Cable clamp attachment Cable Setting the USB flash drive cover 1. Insert the USB flash drive into the USB port. 2. Remove the screw from the monitor, attach the USB flash drive cover, and fasten with the screw that you removed. USB port Screw Caution • Do not tighten the screw excessively. Excessive tightening may damage the monitor. TIPS • If the USB flash drive cover will be attached, use a USB flash drive with dimensions no greater than 1-15/16 inch (50 mm) (L) × 13/16 inch (20 mm) (W) × 1/2 inch (12 mm) (H). 15 E
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
 |
 |
