Sharp PN-H801 Operation Manual - Page 27
Menu Items, Setup, Sleep Timer, Input Select, Screen Position D-sub, Input Skip, Input Label
![]() |
View all Sharp PN-H801 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Menu Items nSETUP LANGUAGE Sets the display language for the menu screen. SLEEP TIMER When the set time elapses, the monitor automatically enters standby mode. This can be set to up to 23 hours in increments of one hour. INPUT SELECT HDMI SETTING HDMI CEC LINK When AUTO is selected, HDMI CEC LINK is enabled and the HDMI input terminal changes when playback is started on an external device. When OFF is selected, AUTO POWER ON and AUDIO RETURN CHANNEL cannot be selected. AUTO POWER ON Sets whether the monitor power turns on when the power of an external device is turned on. AUDIO RETURN CHANNEL When HDMI1 input is used, sets whether the monitor audio is output from compatible devices via HDMI cable. POSITION Adjusts the horizontal and vertical position of the image. HDMI AUTO WIDE AUTO MODE Automatically changes the screen size to ZOOM if a black band appears at the top and bottom of the input video. HDMI SIGNAL Sets to ENABLE to have the screen size change automatically according to the screen size control signal included in the video signal input from the HDMI input terminal. SCREEN POSITION (D-SUB) INPUT SIGNAL When the input signal is 1024 x 768 or 1366 x 768 in PC D-sub, select to match the resolution. AUTO SYNC When YES is selected, H-POS., V-POS., CLOCK, and PHASE are automatically adjusted. Use this automatic adjustment when you use the PC D-Sub to display a PC screen or when you change the setting of the PC. (See page 29.) SCREEN POSITION Adjusts H-POS. (Position of the longest direction), V-POS. (Position of the shortest direction), CLOCK, and PHASE. To restore factory default settings, use RESET. INPUT SKIP AUTO Skips when the terminal is not connected. ON Always skips. OFF Always enable selection of the input. INPUT SKIP is displayed on the input mode selection screen as SELECTABLE/NOT SELECTABLE. INPUT LABEL Changes the display names of input mode. To enter characters, see page 29. AUDIO SELECT (HDMI3/D-SUB) Sets the audio input terminal used when HDMI3 or PC D-sub is input. HDMI3 HDMI Inputs audio from the HDMI3 input terminal. HDMI + ANALOG Inputs audio from the audio input terminal. D-SUB VIDEO Do not use audio. VIDEO + AUDIO Inputs audio from the audio input terminal. DIGITAL AUDIO OUTPUT Sets the audio that is output from the digital audio output (optical) terminal. When connecting a device that does not support AAC / Dolby Digital to the digital audio output (optical) terminal, set to PCM. When connecting an AV amplifier or other device that supports AAC / Dolby Digital, set to BIT STREAM. 27 E
![](/manual_guide/products/sharp-pnh801-operation-manual-890b058/27.png)