Sharp PN-K321 Operation Manual - Page 19
Menu item details, PICTURE, Menu Items
View all Sharp PN-K321 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Menu Items Menu item details The menu will differ depending on the input mode. nPICTURE BRIGHT Adjusts the backlight brightness. CONTRAST Adjusts the difference between the bright and dark portions of the image. BLACK LEVEL Adjusts the entire brightness of the video signals. TINT Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta. COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. Some settings and images may cause vertical lines to appear in the center of the screen. COLOR ADJUSTMENT COLOR MODE The color mode changes in the following order: STD (Standard) → VIVID → sRGB → STD... * sRGB applies to PC input only. sRGB is international standard of color representation specified by IEC (International Electrotechnical Commission). Color conversion is made in taking account of liquid crystal's characteristics and represents color tone close to its original image. WHITE BALANCE THRU........... Displays the input signal level as is. (for PC input only) PRESET...... Selects the color temperature using PRESET. USER Used for adjusting R-/G-/B-CONTRAST and R-/G-/B-OFFSET respectively. PRESET Selects the color temperature when the WHITE BALANCE is set to PRESET. The setting values are shown for reference. The color temperature of the screen varies over time. This function is not intended to keep the color temperature constant. USER Adjusts each item when the WHITE BALANCE is set to USER. R-CONTRAST..... Adjusts bright-toned red component. G-CONTRAST..... Adjusts bright-toned green component. B-CONTRAST..... Adjusts bright-toned blue component. R-OFFSET........... Adjusts dark-toned red component. G-OFFSET........... Adjusts dark-toned green component. B-OFFSET........... Adjusts dark-toned blue component. COPY TO USER Copies the value of white set for PRESET to the USER setting. Select "ON" and then press [MENU/ENTER] button. (In the case other than white, color tone may differ from the PRESET.) GAMMA Selects the gamma. C.M.S.-HUE (AV input) Adjusts color tone with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and M (magenta). C.M.S.-SATURATION (AV input) Adjusts color vividness with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and M (magenta). C.M.S.-VALUE (AV input) Adjusts color brightness with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and M (magenta). ADVANCED RGB INPUT RANGE Sets the RGB input signal range. To set automatically, select AUTO. Use AUTO normally. If the RGB input signal range cannot be set appropriately even when using AUTO, set according to the image. When the setting is different, images will be displayed with washed out blacks and compressed gradients. RESET Resets the values of the PICTURE menu items to the factory preset values. Select "ON" and then press [MENU/ENTER] button. 19 E