Sharp PN-K321 Operation Manual - Page 21
Menu Items, Others, Screen Motion, Pattern, Motion Time 1, Power Management, Display Position
View all Sharp PN-K321 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Menu Items nOTHERS SCREEN MOTION PATTERN Residual images are reduced by moving the screen. OFF SCREEN MOTION function is disabled. PATTERN1......A black screen spreads from the bottom of the screen and then PATTERN1 PATTERN2 shrinks to the bottom of the screen. If the monitor is installed in the portrait orientation, a black screen spreads from the left end of the screen and then shrinks to the left end of the screen. PATTERN2......A black bar moves from the left end to the right end of the screen. If the monitor is installed in the portrait orientation, a black bar moves from the top to the bottom of the screen. MOTION TIME 1 Specify a time period (operating interval) until SCREEN MOTION starts. MOTION TIME 2 Specify a time period during which SCREEN MOTION operates (time period during which the screen will move). POWER MANAGEMENT POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode. SIZE Changes the screen size. (See page 17.) 4096 DISPLAY POSITION Sets the position where the image is displayed (LEFT, CENTER, or RIGHT) when a signal with 4096 horizontal dots is input. When RIGHT or LEFT is set, a black band may appear in the middle of the screen with some images. This setting is only valid when the input is HDMI and the screen size is Dot by Dot. LEFT CENTER RIGHT MUTE AUDIO Temporarily mutes the sound. The sound is restored when OFF is selected. * If using the monitor buttons, hold both [MENU/ENTER] button and [VOL-/ ] button at the same time. INFORMATION Shows information about the monitor. When HDMI DUAL is set to ON, the signal information of each terminal appears in HDMI1and HDMI2 fields. When a button other than [VOL+/ ]/[VOL-/ ] button, brightness adjustment button ( / ) is pressed, or if no action is taken for 15 seconds, the display disappears. TIPS • When WHITE BALANCE is set to THRU, BLACK LEVEL, CONTRAST, TINT, COLORS, RGB INPUT RANGE, GAMMA, PRESET, USER and COPY TO USER cannot be set. • If COLOR MODE is set to sRGB, the following items cannot be set. WHITE BALANCE, PRESET, USER, COPY TO USER, and GAMMA • When the COLOR MODE is set to VIVID, GAMMA can not be adjusted. 21 E