Sharp PN-K321 Operation Manual - Page 31

Specifications nProduct Specifications Model PN-K321 LCD component 32" Class [31-35/64 inch (80.1cm) diagonal] TFT LCD Max. resolution (pixels) 3840 x 2160 Max. colors Approx. 1.07 billion colors Pixel pitch 0.182 mm (H) × 0.182 mm (V) Viewing angle 176° right/left/up/down (contrast ratio ≥ 10) Screen active area inch (mm) 27-31/64 x 15-15/32 (697.9 x 392.6) Response speed 8 ms (Gray to Gray, avg.) Plug and play VESA DDC2B Power management VESA DisplayPort Input terminals PC/AV HDMI x 2 PC DisplayPort x 1 Audio 3.5 mm mini stereo jack x 1 Serial (RS-232C) 3.5 mm mini jack x 1 Output terminals Audio 3.5 mm mini stereo jack x 1 Speaker output 2 W + 2 W Power requirement AC 100 V - 240 V, 50/60 Hz (when using the supplied AC adapter) Operating temperature 32°F to 104°F (0°C to 40°C) Operating humidity 20% to 80% (no condensation) Power consumption (input signal waiting mode *1 / standby mode) 93 W *2 (5.9 W / 5.8 W) (when using the supplied AC adapter) Dimensions (excluding protrusions) inch (mm) Approx. 29-17/32(W) x 1-25/64(D) x 17-3/8(H) (750 x 35 x 441) (monitor only) Approx. 29-17/32(W) x 10-3/32(D) x 19-17/64~24-31/32(H) (750 x 256 x 489~634) (monitor on supplied stand) Weight lbs. (kg) Approx. 16.5 (7.5) (monitor only) Approx. 28.7 (13.0) (monitor on supplied stand) *1 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 1.2 W *2 When using the monitor in DC19.5 V : 87 W As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. 31 E