Sharp R-21LC Owners Manual for R-21LC - Page 15

OTHER CONVENIENT FEATURES Signal setting There is a choice of 2 different sounds and no sound on your oven. To set signal, touch the SET pad twice within 2 seconds and then touch the SIGNAL pad continuously until you hear desired tone. Demonstration mode To demonstrate,touch SELECTATIME, 0 and then touch START and hold for 3 seconds.Cooking operations can now be demonstrated with no power in the oven. The timer will count down rapidly. To cancel, touch SELECTATIME,then 0 and STOP/ CLEAR. SERVICE CALL CHECK Please check the following before calling for service! 1. Plug the power cord into a three-pronged electric-outlet. (See page 4) 2. Place one cup of water in a glass measure in the oven and close the door securely. Operate the oven for one minute on High (100%). A. Does the oven light come on? Yes _______ No _______ B. Does the cooling fan work? (Put your hand over the back ventilation opening.) Yes _______ No _______ C. (For R-21LT or R-21LV) Does the "ON" indicator come on? D. At the end of 1 minute, is the water hot? Yes _______ No _______ Yes _______ No _______ If "NO" is the answer to any of the above questions, please check electrical outlet, fuse and/or circuit breaker. If they are functioning properly, CONTACT YOUR NEAREST SHARP AUTHORIZED SERVICER. A microwave oven should never be serviced by a "do-it-yourself" repair person. NOTE: If time is counting down very rapidly, the demonstration mode may be set. To cancel, unplug the oven from the electrical outlet and replug. ERROR MODE Should the error indicator appear in the readout, follow the instructions: EE Mode EE 9 Reason Maximum time is exceeded Action Required Check page 11 in the Operation Manual. Touch STOP/CLEAR pad and reprogram correctly. 14