Sharp R-320HW R-320HK/HW/HQ Operation Manual - Page 11

BEFORE OPERATING MANUAL OPERATION • Before operating your new microwave oven make sure you read and understand this operation manual completely. • Before the oven can be used, follow these procedures: 1. Plug in the oven. Close the door. The oven display will show " ENJOY YOUR OVEN PRESS CLEAR AND PRESS CLOCK ". 2. Touch the STOP/CLEAR pad. : will appear. TIME COOKING Your oven can be programmed for 99 minutes 99 seconds (99.99). Always enter the seconds after the minutes, even if they are both zeros. • Suppose you want to cook for 5 minutes at 100%. PROCEDURE DISPLAY 1 500 Enter cooking time. 5.00 3. Set clock. LANGUAGE / WEIGHT SELECTION The oven comes set for English and U.S. Customary Unit-pounds. To change see page 18. 2 Touch START pad. 5.00 COOK TO SET POWER LEVEL TO SET THE CLOCK • Suppose you want to enter the correct time of day 12:30 (A.M. or P.M.). PROCEDURE DISPLAY There are eleven preset power levels. Using lower power levels increases the cooking time which is recommended for foods such as cheese, milk and long slow cooking of meats. Consult cookbook or recipes for specific recommendations. 1 2 Touch CLOCK pad and number pad 2 . ENTER TIME TOUCH POWER LEVEL PAD once APPROXIMATE PERCENTAGE OF POWER 100% COMMON WORDS FOR POWER LEVELS High 21230 Enter the correct time of day by touching the numbers in sequence. 12:30 twice 3 times 4 times 5 times 6 times 90% 80% 70% 60% 50% Medium High Medium 3 12:30 Touch CLOCK pad again. 7 times 8 times 9 times 10 times 40% 30% 20% 10% Med Low / Defrost Low This is a 12 hour clock. If you attempt to enter an 11 times 0% incorrect clock time, ERROR will appear in the display. Touch the STOP/CLEAR pad and re-enter the time. • Suppose you want to defrost for 5 minutes at 30%. • If the electrical power supply to your microwave PROCEDURE DISPLAY oven should be interrupted, the display will intermittently show " ENJOY YOUR OVEN PRESS CLEAR AND PRESS CLOCK " after the power is reinstated. If this occurs during cooking, the program 1 500 Enter defrost time. 5.00 will be erased. The time of day will also be erased. Simply touch STOP/CLEAR pad and reset the clock for the correct time of day. 2 x8 P-30 Touch POWER LEVEL pad 8 times or hold down STOP/CLEAR Touch the STOP/CLEAR pad to: until the desired power level appears. 1. Erase if you make a mistake during programming. 2. Cancel timer. 3. Stop the oven temporarily during cooking. 4. Return the time of day to the display. 3 Touch START pad. 5.00 COOK 5. Cancel a program during cooking, touch twice. 4 When the defrost time is complete, a long tone 9 will sound and END will appear in the display.