Sharp SW340 CD-SW340 Operation Manual - Page 20

CD or MP3/WMA disc Playback CD-SW340 Advanced CD or MP3/WMA disc playback (continued) Direct track search By using the direct search buttons, the desired tracks on the current disc can be played. Use the direct search buttons on the remote control to select the desired track while playing the selected disc. Selected track number To repeat one disc: Press the / button twice. To repeat all tracks on up to 5 discs: Press the / button three times. To repeat desired tracks: Perform steps 1 - 6 in "Programmed play" section on page 21 and then press the / button twice. The direct search buttons allow you to select up to number 9. When selecting number 10 or higher, use the "+10" button. A. For example, to choose 13 1 Press the "+10" button once. 2 Press the "3" button. To cancel repeat play: Press the / button again. " " will disappear. Random play The tracks on the disc(s) can be played in random order automatically. To random play all tracks on up to 5 discs: Press the RANDOM button on the remote control. B. For example, to choose 130 1 Press the "+10" button three times. 2 Press the "0" button. Notes: A track number higher than the number of tracks on the disc cannot be selected. To cancel random play: Press the / button. "R" will disappear. During random play, direct search is not possible. Notes: To stop playback: Press the (CD ) button. If you press the button during random play, you can move to the next track by the random operation. However, the button does not allow you to move to the previous track. It will go to the beginning of the current track instead. Repeat play In random play, the unit will select and play tracks automatically. Repeat play can play all 5 discs, all tracks on a chosen disc, or a (You cannot select the order of the tracks.) programmed sequence continuously. Caution: After performing repeat or random play, be sure to press the 20 (CD ) button. Otherwise, the disc(s) will play continuously.