Sharp SW340 CD-SW340 Operation Manual - Page 32

CD-SW340 Timer and sleep operation (Remote control only) (continued) 5 Press the or button to select "PLAY" or "REC", and press the MEMORY button. White Red The illustrations show the daily timer setting. 6 Press the or button to adjust the hour and then press the MEMORY button. Advanced Features Timer playback or timer recording Before setting timer: 1 Check that the clock is set to the correct time (refer to page 16). If it is not set, you cannot use the timer function. 2 For timer playback: Load a cassette or discs to be played. For timer recording: Load a cassette for recording in the cassette compartment. The illustrations show the timer playback setting in the daily timer mode. 7 Press the or button to adjust the minutes and then press the MEMORY button. 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CLOCK/TIMER button. 3 Within 10 seconds, press the or button to select "ONCE" or "DAILY", and press the MEMORY button. Set the clock to the correct time if "ONCE" or "DAILY" does not appear. 4 Within 10 seconds, press the or button to select "ONCE SET" or "DAILY SET", and press the MEMORY button. 8 Set the time to finish as in steps 6 and 7 above. 9 Switch input with the or press the MEMORY button. button, and then To select the timer playback source: CD, TUNER, TAPE 1 or TAPE 2. To select the timer recording source: TUNER. When you select the tuner, select a station by pressing the or button, and then press the MEMORY button. If a station has not been programmed, "NO PRESET" will be displayed and timer setting will be canceled. 32