Sharp SW340 CD-SW340 Operation Manual - Page 30
Tape Recording
UPC - 074000368927
View all Sharp SW340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
CD-SW340 Recording on a cassette tape (continued) Tape Recording POWER ON/ STAND-BY CD TIMER CD OPEN/ CLOSE 5 5 4 3 2 1 4 3 PLAYBACK (PLAY & STOP) PHONES AUDIO IN RECORD/PLAYBACK 2 1 Recording from a CD or MP3/WMA disc 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button. 3 Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. 4 Press the button. Recording will be paused. 5 Press one of the 1 - 5 buttons to select the desired disc. 6 Within 5 seconds, press the / button to start recording. Recording is started from the selected disc. When the playback of the last track is finished or the end of the tape is reached, the disc and the cassette will stop automatically. Playback of the disc will start approximately 7 seconds after the tape starts. To stop recording: Press the (TAPE ) button. The disc and tape will stop. To perform programmed recording: 1 Program discs and tracks (see page 21). 2 Press the button. 3 Press the / (TAPE ) button to start recording. To stop recording: Press the (TAPE ) button. The disc and tape will stop. Recording from the radio 1 Tune in to the desired station (see page 26). 2 Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. 3 Press the button. Recording will be paused. 4 Press the / (TAPE ) button to start recording. To interrupt recording: Press the button. To resume recording, press the / (TAPE ) button. To stop recording: Press the (TAPE ) button. Note: If you hear a whistling noise while recording an AM station, move the AM loop antenna. 30