Sharp XE-A203 Service Manual - Page 15
Drawer Open Test, External Ram Test, Cpu Internal Ram Test, Cpu Internal Rom Test - error h
UPC - 074000049178
View all Sharp XE-A203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
8) DRAWER OPEN TEST 1 Key operation 110 RCPT/PO 2 Test procedure Drawer open. 3 Display OP display: 110 POPUP display: 4 Check that The drawer opens normally. 5 End of testing The test will automatically be terminated and the printer prints as follows. End print: 110 9) EXTERNAL RAM TEST 1 Key operation 120 RCPT/PO 2 Test procedure The standard 128 Kbyte RAM is checked. The contents of the memory are lost after this test. RAM (08000H ~ 27FFFH area) is tested in the following procedure. a) Data in the test area is stored. b) Write "00H" c) Read and compare "00H" and then write "55H" d) Read and compare "55H" and then write "AAH" e) Read and compare "AAH" f) Restore stored data. 3 Display OP display: 120 POPUP display: 4 End of testing The test will automatically be terminated and the printer prints as follows. When the test ends normally: 120 When an error occurs: RAM ERROR X *****h 120 10) CPU INTERNAL RAM TEST 1 Key operation 121 RCPT/PO 2 Test procedure The test program checks internal RAM (24Kbyte) of the CPU. The contents of the memory are lost after this test. RAM (00400H - 053FFH area) is tested in the following procedure. a) Data in the test area is stored. b) Write "00H" c) Read and compare "00H" and then write "55H" d) Read and compare "55H" and then read "AAH" e) Read and compare "AAH" f) Stored data is restored. 3 Display OP display: 121 POPUP display: 4 End of testing. The test will automatically be terminated and the printer prints as follows. When the test ends normally: 121 When an error occurs: RAM ERROR X *****h 121 (*) x = 1: Data error x = 2: Address error (*) When an error occurs, the printer outputs the error message and then the address where the error has occurred in the area "*****". 11) CPU INTERNAL ROM TEST 1 Key operation 140 RCPT/PO 2 Test procedure The test program checks that the checksum of the CPU internal flash ROM (C0000H - FFFFFH) is correct. The lower two digits of the checksum should be 10H. 3 Display OP display: 140 POPUP display: 4 End of testing The test will automatically be terminated and the printer prints as follows. When the test ends normally: 140 ROM (*) x = 1: Data error x = 2: Address error (*) When an error occurs, the printer outputs the error message and then the address where the error has occurred in the area "*****". When an error occurs: RAM ERROR X *****h 120 ROM XE-A203U/XE-A203A TEST FUNCTION - 13 -