Sharp XE-A203 Service Manual - Page 6

7. DRAWER [OUTLINE] • Standard equipment: Yes (1) • Max. number of additional drawers: 1 • The drawer consists of: 1) Drawer box (outer case) and drawer 2) Money case 3) Coin case 4) Lock (attached to the drawer) [SPECIFICATION] 1) DRAWER BOX AND DRAWER Type SEC SECL Model name of SJ415 the drawer box SJ423 Size (mm) 330(W) x 418(D) x 98(H) 355(W) x 423(D) x 110(H) Material Plastic Bell - Release lever Standard equipment: situated at the bottom Drawer open sensor - 2) MONEY CASE Type Separation from the drawer Separation of the bill compartments from the coin compartments Bill separator Number of compartments SEC SECL Disallowed Allowed - 4B/5C 5B/6C Layout: 4B/5C (U version) 5B/6C (A version) 3) Drawer Lock Key This key locks and unlocks the drawer. To lock it, turn 90 degrees counterclockwise. To unlock it, turn 90 degrees clockwise. 8. USB PORT [DEVICE] USB B Type [OUTLINE] This ECR has 1 port. This is used in order to connect with a personal computer. [SPECIDICATIONS] 1) Transmission tate USB 2.0 Full Speed Max. 12Mbps 2) Connector USB B Type 3) Pin assign 1Pin 5V 2Pin -D 3Pin +D 4Pin GND 9. BATTERY 1) MEMORY BACK UP BATTERY For memory back up, the dry battery AA (3 pieces) are needed. 1. Memory holding time: Approximate 1 year after New dry batteries are inserted. 2. Battery exchange method: When the low battery symbol "L" lights up, batteries (3 pieces) exhange by the following method, with 2 days. 1) Power on the ECR. 2) Mode switch turn to "REG" mode. 3) Release the OLD dry batteries (3 pieces). 4) Insert the NEW dry batteries (3 pieces). 5) Confirm the low battery symbol "L" lights off. 2) LOW BATTERY Low battery indication will appear on the left side of display when the battery voltage is low. CASE 1: When any numeric entry & any item entry is not done or just after finalization. The machine can indicate the low battery condition. (Always) CASE 2: When numeric entry or item entry is done. Battery condition will not appear. Exceptionally, when the power is restored after a power failure, the low battery condition will appear on the display only when the battery is low. And the indicator will disappear after any key entry. XE-A203U/XE-A203A SPECIFICATIONS - 4 -