Sharp XG-PH70X XG-PH70X Operation Manual - Page 23
Quick Start, s 38
UPC - 074000365117
View all Sharp XG-PH70X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4. Adjust the angle Adjust the projector angle • Shift the lens horizontally and vertically. 1 Press on the projector or on the remote control. 2 Press ', ", \ or | on the projector or the remote control. • Adjust the projector angle by rotating the adjustment feet. Quick Start 5. Adjust the focus and the zoom 1 Press on the projector or on the remote control to adjust the focus. Pages 38, 39 2 Press on the projector or on the remote control to adjust the zoom. Page 40 6. Correcting the image distortion due to the projection angle 1 Press on the projector or on the remote control. 2 Press on the projector or on the remote control. 3 Press ', ", \ or | to move the position for the upper left of the image. 7. Select the input mode 4 Press or to set the position. 5 Repeat the same procedure with the positions for the upper right, lower right and lower left of the image. • When the position of the lower left is set, the correction is made and the display disappears. Page 41 Press on the projector or on the " On-screen Display (RGB) remote control to select the "INPUT 1" mode. • When pressing Pressing on the projector, input mode switches in order of : INPUT 1 INPUT 2 INPUT 3 . on the projector switches between "INPUT 4" and "INPUT 5". • When using the remote control, press 8. Turn the power off //// to switch the input mode. Page 45 Press press on the projector or on the remote control. While the confirmation message is displayed, or again. " On-screen Display • You can unplug the power cord even if the projector is operating. • Even if you unplug the power cord from the AC outlet, the cooling fan continues to run for a while. Page 37 -21