Sharp XG-PH70X XG-PH70X Operation Manual - Page 32
Connecting to Video Equipment
UPC - 074000365117
View all Sharp XG-PH70X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Connecting to Video Equipment Before connecting, ensure the power cord of the projector from the AC outlet is unplugged, and that the devices to be connected are turned off. After making all connections, turn on the projector and then the other devices. The projector has a DVD digital terminal, computer-RGB/component terminal, S-video terminal and video terminal for video input. Refer to the listed illustrations on how to connect audiovisual equipment. If your audio-visual equipment has an RGB output terminal or component output terminal, use the computer-RGB/component terminals (INPUT 1 or 2) on the projector for video connection. Connecting to Video Equipment That Has an HDMI Output Terminal with a DVI to HDMI Cable Use a DVI to HDMI cable when connecting HDMI video equipment such as DVD players to the INPUT 3 terminal. Video Equipment Side view To HDMI output terminal To audio output terminals To INPUT 3 terminal DVI to HDMI cable (commercially available) ø3.5 mm stereo minijack to RCA audio cable (commercially available) To AUDIO input (2, 3) terminal Note • Select the input signal type of the video equipment. See page 63. • While the projector is connected to video equipment that has an HDMI output terminal, only the video signal can be input to the projector. (Connect the AUDIO input (2, 3) terminal for audio input.) • Depending on specifications of video equipment or DVI to HDMI digital cable, the signal transmission may not work property. (The HDMI specification does not support all connections to video equipment that has HDMI digital output terminal using a DVI to HDMI digital cable.) • For details on compatibility for connection, see support information on DVI connection provided by the video equipment manufacturer. -30