Sharp XG-V10XU XG-V10XU Operation Manual - Page 71
Lamp Maintenance, Confirming the Lamp Usage Time - troubleshooting
View all Sharp XG-V10XU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Lamp Maintenance Confirming the Lamp Usage Time Lamp The lamp in this projector operates for approximately 1,000 cumulative hours, depending on the usage environment. (As the usage environment can vary significantly, the projector lamp may not operate for 1,000 hours.) It is recommended that the lamp be replaced after approximately 900 cumulative hours of use or when you notice a significant deterioration of the picture and color quality. The lamp usage time can be checked with the On-screen Display. CAUTION • Intense light hazard. Do not attempt to look into the aperture and lens while the projector is operating. Projector Remote Control 1, 4 2, 3 1.2.3 4.5.6 (GUI) On-screen Display This function allows you to check the accumulated lamp usage time. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. 2 Press ß/© to select "Options (2)". 3 Press ∂/ƒ to select "Lamp Timer". The lamp usage time will be displayed. 4 To exit from the GUI, press MENU. • It is recommended that the lamp be replaced after approximately 900 cumulative hours of use. See pages 71 and 72 for lamp replacement. Maintenance & Troubleshooting Condition The LAMP REPLACEMENT indicator lights up red, and "LAMP" and " " will flash in yellow in the lower-left corner of the picture. A significant deterioration of the picture and color quality occurs. The power will automatically turn off and the projector will enter standby mode. "LAMP" and " " will flash in red in the lower-left corner of the picture, and the power will turn off. Problem • Lamp has been used for over 900 hours. • Lamp has been used for over 1,000 hours. Possible Solution • Purchase a replacement lamp unit (lamp/cage module) of the current type BQC-XGV10WU/1 from your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center. • Replace the lamp. (See pages 71 and 72.) If you wish, you may have the lamp replaced at your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center. E-70