Sharp XL-1200 XL1200 Operation Manual - Page 11

Remote Control „ Battery installation Use 2 "AAA" size batteries (UM-4, R03, HP-16 or similar). Batteries are not included. 1 Remove the battery cover. 2 Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them toward the battery terminals. 3 Replace the cover. „ Test of the remote control Check the remote control after checking all connections have been made correctly. (See pages 12 - 14.) Face the remote control directly to the remote sensor on the unit. The remote control can be used within the range shown below: Press the POWER button. Does the power turn on? Now, you can enjoy the music. Remote sensor Preparation for Use - Remote Control - Precautions for battery use: z Replace all old batteries with new ones at the same time. z Do not mix old and new batteries. z Remove the batteries if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage. Caution: z Do not use rechargeable batteries (nickel-cadmium battery, etc.). z Installing the batteries incorrectly may cause the unit to malfunc- tion. Notes concerning use: z Replace the batteries if the operating distance is reduced or if the operation becomes erratic. z Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth. z Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit. z Keep the remote control away from moisture, heat, shock, and vibrations. 8" - 20' (0.2 m - 6 m ) 11 01/2/19 XL-1200(U)2.fm