Sharp XL-1200 XL1200 Operation Manual - Page 14

Preparation for Use - System Connections - System Connections (continued) „ Speaker connection Connect the wire with the white line to the minus (-) terminal and the black wire to the plus (+) terminal. Right speaker Left speaker „ Subwoofer connection When a commercially available speaker with a built-in amplifier is connected to this unit, you can enjoy sound with emphasized bass. Connect an RCA cord from a commercially available speaker with a built-in amplifier to the SUBWOOFER OUT jack. Speaker with a built-in amplifier White line Black Caution: z Connect the speaker wires to the speakers first, then to the unit. z Use speakers with an impedance of 8 ohms or more, as lower impedance speakers can damage the unit. z Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit. z Do not let the bare speaker wires touch each other. „ Connecting the AC power cord After checking all the connections have been made correctly, connect the AC power cord to the AC power input jack, then plug the AC power cord of this unit into the AC outlet. Notes: z Unplug the unit if it will not be used for a prolonged period of time. z Never use a power cord other than the one supplied. Otherwise, a malfunction or an accident may occur. Incorrect 14 Incorrect 01/2/19 XL-1200(U)2.fm