Sharp XL-1200 XL1200 Operation Manual - Page 28

Advanced Features - Enhancing Your System - Enhancing Your System The connection cord is not included. Purchase a commercially available cord as shown below. VCR, DVD, etc. Red White To the line output jacks White Red MD recorder RCA cord (not supplied) Headphones To the optical line input jack Connection cable for digital recording „ Listening to the playback sounds from VCR, DVD, etc. 1 Use a connection cord to connect the VCR, DVD, etc. to the VIDEO/AUX IN jacks. When using video equipment, connect the audio output to this unit and the video output to a television. 2 Press the POWER button to turn the power on. 3 Press the FUNCTION button until "AUX" appears on the display. When operating with the remote control, press the VIDEO/AUX button. 4 Play the VCR, DVD, etc. Note: To prevent hum interference, place this unit away from a television. „ To record CD signals on MDs The digital signal from this unit can be recorded by MiniDisc recorders, etc. 1 Remove the DIGITAL OUT jack cover. 2 Use a connection cable for digital recording to connect the unit to the OPTICAL IN jack of a MiniDisc recorder, etc. 3 Press the POWER button to turn the power on. 4 Put the MiniDisc recorder, etc. in the recording mode. 5 Play a CD on this unit. Note: Only CD signals can be output. „ Headphones z Before plugging in or unplugging the headphones, reduce the volume. z Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16 ohms and 50 ohms impedance. The recommended impedance is 32 ohms. z Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME buttons. 28 01/2/19 XL-1200(U)3.fm