Sharp XL-1200 XL1200 Operation Manual - Page 29

References - Troubleshooting Chart - Troubleshooting Chart Many potential "problems" can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. „ General Symptom z The clock is not on time. z When a button is pressed, the unit does not respond. z No sound is heard. Possible cause z Did a power failure occur? Reset the clock. (Refer to page 17.) z Set this unit to the power stand-by mode and then turn it back on. z If the unit still malfunctions, reset it. (Refer to step 3 under "If trouble occurs" on page 30.) z Is the volume level set to "0"? z Are the headphones connected? z Are the speaker wires disconnected? „ CD player Symptom z Playback does not start. z Playback stops in the middle or is not performed properly. z Playback sounds are skipped, or stopped in the middle of a track. Possible cause z Is the disc loaded upside down? z Does the disc satisfy the standards? z Is the disc distorted or scratched? z Is the unit located near excessive vibrations? z Is the disc very dirty? z Has condensation formed inside the unit? „ Tuner Symptom Possible cause z Radio makes unusual z Is the unit placed near the TV or com- noise consecutively. puter? z Is the FM antenna or AM loop antenna placed properly? Move the AC power cord away from the antenna if located near. „ Remote control Symptom z The remote control does not operate. Possible cause z Is the AC power cord of the unit plugged in? z Is the battery polarity respected? z Are the batteries dead? z Is the distance or angle incorrect? z Does the remote control sensor receive strong light? 29 01/2/19 XL-1200(U)3.fm