Sharp XL-HP500 Operation Manual - Page 15

Listening to a CD (CDs) This system can also play audio CD-R and CD-RW discs, but cannot record. Some audio CD-R and CD-RW discs may not be playable due to the state of disc or the device that was used for recording. 5 Press the button to close the disc tray 1. XL-HP500W ENGLISH CD Playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button. 3 Press the button to open the disc tray 1. 4 Place the CD on the disc tray 1, label side up. Be sure to place 8 cm (3") CD in the middle of the disc trays. 12 cm (5") 8 cm (3") Total number of tracks on the CD whose number is flashing Total playing time of the CD whose number is flashing 6 You can place discs on the trays 2 - 3 by following steps 3 - 5. 7 Press the / button to start playback. " Playback will begin from track 1 on the DISC 1. After that disc finishes playing, the next disc will automatically play. " When the last track on the third disc has finished playing, the CD player will stop automatically. " When there is no CD in one of the disc tray 1 - 3 positions, that position will be skipped and the next CD will be played. To interrupt playback: Press the CD button on the remote control. To resume playback from the same point, press the button. To stop playback: Press the (CD ) button. To exchange other CDs whilst playing a disc: Press the button for the stopped disc and exchange discs. To remove the CDs: Whilst in the stop mode, press the desired button. 02/8/6 XL-HP500W(A)2.fm E-14