Sharp XL-HP500 Operation Manual - Page 19

Listening to the radio 3 Press the TUNING/TIME ( or ) button to tune in to the de- sired station. Manual tuning: Press the TUNING/TIME button as many times as required to tune in to the desired station. Auto tuning: When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. XL-HP500W ENGLISH Radio Notes: " When radio interference occurs, auto scan tuning may stop automatically at that point. " Auto scan tuning will skip weak signal stations. " To stop the auto tuning, press the TUNING/TIME button again. To receive an FM stereo transmission: Press the TUNER (BAND) button to display the "ST" indicator. " " " will appear when an FM broadcast is in stereo. FM stereo mode indicator ! Tuning 1 Press the ON/STAND-BY button to turn the power on. 2 Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). FM stereo receiving indicator " If the FM reception is weak, press the TUNER (BAND) button to extinguish the "ST" indicator. The reception changes to monaural, and the sound becomes clearer. Note: This product can receive FM stereo/FM monaural and AM monaural broadcasts. AM stereo broadcasts will not be played in stereo. E-18 02/8/6 XL-HP500W(A)2.fm