Singer 1 One Instruction Manual 26 - Page 19
Lower Looper
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Thread the looper area of the machine following the green color coded thread guides (4~9). Thread the hole in the upper looper from front to back 9. Note: Make sure thread passes behind lower looper. Note: Use tweezers provided in the accessory case to aid in threading the looper. Pull about 10cm(4 inches) of thread through the looper and place to the back of the needle plate. 2) Threading the Lower Looper (Red) Thread the lower looper as indicated 1~10. Raise Presser foot by lowering presser bar lifter to release Tension discs. 8 4 9 9 5 8 7 6 1 2 3 4 10 5 9 8 7 6 Pass thread from back to the front through the thread guide 1. 1 Thread the top cover thread guide by pulling 2 the thread towards the left until it slips under guide. Then pull thread along the right side of 2 button as illustrated. 18