Singer 1 One Instruction Manual 26 - Page 65

Cleaning the Machine, Oiling the Machine

Page 65 highlights

26. MACHINE MAINTENANCE An overlock machine requires more maintenance than a conventional machine for two reasons: 1) A lot of lint is produced due to the cutting action of the knives. 2) An overlock runs at a very high speed and needs to be oiled frequently to lubricate the internal working parts. Cleaning the Machine Danger: Before cleaning your machine, disconnect power line plug from the wall receptacle. Clean the lint from the looper and knife area often with a dry lint brush. Oiling the Machine Danger: Before lubricating your machine, disconnect power line plug from the wall receptacle. The oiling points shown in the diagram, should be oiled periodically. Note: Use only sewing machine oil. Do not use any other oil or damage could result. 64 A B C D

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

D
C
B
A
64
An overlock machine requires more maintenance than a
conventional machine for two reasons:
1) A lot of lint is produced due to the cutting action
of the knives.
2) An overlock runs at a very high speed and needs
to be oiled frequently to lubricate the internal
working parts.
26. MACHINE MAINTENANCE
Clean the lint from the looper and knife area often
with a dry lint brush.
Danger:
Before cleaning your machine, disconnect
power line plug from the wall receptacle.
Cleaning the Machine
The oiling points shown in the diagram, should be
oiled periodically.
Note: Use only sewing machine oil. Do not use any
other oil or damage could result.
Danger:
Before lubricating your machine, disconnect
power line plug from the wall receptacle.
Oiling the Machine