Singer 1 One Instruction Manual 26 - Page 40
Double Chain stitch, How to Balance, Correct Balance
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
22. SETTINGS AND SEWING 1) Double Chain stitch Tension is automatically set when seiecting the desired stitch type with the Auto Tension Dial (ATD). Tension may be fine tuned with the Fine Tuning Levers according to the following variables: 1) Type and thickness of fabric 2) Needle size 3) Size, type and fibre content of thread * Stitch length for double chain stitch should be set at over 2mm. Correct Balance Set auto tension dial to D shown at right and test sew on a sample of your fabric. ATD:D NEEDLE POSITION SEAM WIDTH FINGER KNOB STITCH LENGTH DRIVING CULTCH POSITION R 2~4 C Needle thread Topside Chain stitch looper thread Underside Fabric Tension Dial Orange Blue Green Red Medium weight Brown How to Balance When the chain stitch needle thread tension is too loose; -Move the needle thread tension fine tuning lever (blue) toward a higher position. -Or, move the chain stitch looper thread tension fine tuning lever (brown) toward a lower position. Needle thread Topside Chain stitch looper thread Underside 39