Singer 1 One Instruction Manual 38 - Page 25
Adjust, Stitch, Length, Disengage, Movable, Upper, Knife
![]() |
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
* Pull the threads through the machine one at a time. * If threads do not pull easily, check for tangles on thread guides or looping under thread stand. * When pulling thread through the needle, STOP when the knot is in front of the needle. * Cut the thread, and insert it through the needle. * Return tension dials to previous settings. 16. HOW TO ADJUST THE STITCH LENGTH * The stitch length dial should *be set on the 3mm (7/64 inch) setting for most sewing conditions. * Adjust the stitch length to 4mm (5/32 inch) when sewing heavy weight fabrics. * Adjust the stitch length to 2mm (5/64 inch) when sewing light weight fabrics to obtain excellent seams without puckering. 17. HOW TO DISENGAGE MOVABLE UPPER KNIFE * TO PLACE MOVABLE KNIFE IN NONWORKING POSITION * Be sure the machine is disconnected from the power source. * Open looper cover (page 6). * Push the movable knife holder to the right as far as it will go. * Turn the knob away from you until the knife clicks into a horizontal position. Note: If the knife stops in the up position * Turn the hand wheel toward you until the knife clears the top of the machine. * Continue to rotate the knife to the horizontal position. c' 0 0 3 =3 2 Movable knife holder 23
![](/manual_guide/products/singer-1-instruction-manual-38-1482dd2/25.png)