Singer 1 One Instruction Manual 38 - Page 28
adjustment.
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
20. HOW TO SEW A ROLLED HEM * Rolled hemming is done by rolling and overedging the fabric edge. * Light weight fabrics such as lawn, voil, organdy, crepe, etc. perform the best. * Rolled hemming is not suited for heavy or stiff fabrics. is • MACHINE SET UP * Be sure the machine is disconnected from the power source. * Remove the left needle. * Insert a #2054 size #10 or #14 needle in the right needle position. Turn the hand wheel toward you until the needle is at its highest position. * Unscrew the throat plate Screw. Install the rolled hemming throat plate being careful not to catch the threads between the plate and the machine. * Replace throat plate screw. * Open looper cover (page 6). * Disengage upper knife (page 23). * Remove the cylinder cover (page 9). * Align the left edge of the stationary knife with the "M" mark on the rolled hemming throat plate. * See page 25 for adjustment. Note: Be sure the stationary knife is not in contact with the edge of the rolled hemming throat plate. * Replace the cylinder cover, engage upper knife and close the looper cover. 26 M Stationary knife holder