Singer 1 One Instruction Manual 38 - Page 9
Setting, Thread, Guide, Holder
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Warning: * Be sure that the electrical voltage of the electric outlet (wall receptacle) is the same as the rated voltage of the motor. * Handle the foot controller with care and avoid dropping it on the floor. Be sure not to place anything on top of it when not in use. * Disconnect the powerline plug from the electric outlet when changing needles, presser feet or throat plates, or when leaving the machine unattended. This eliminates the possibility of starting the machine by accidentally pressing the controller. * Before'cleaning your machine, disconnect the powerline plug from the electric outlet. SETTING UP THE THREAD GUIDE HOLDER * This machine is shipped with the thread guide holder in the lowered position. * Fully extend the thread guide holder. * The two joints on the telescope will click into place when they are correctly positioned. * Center the thread guides above the spool pins. ldi * Place thread over the cone adapters on the spool pins. Note: If the machine is threaded, straighten the threads to prevent tangling. 7