Singer One Instruction Manual 3 - Page 15
threading, sewing, machine
View all Singer One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
threading your sewing machine Like all sewing machines that produce what is called a "lockstitch", your sewing machine sews with two threads. The upper thread comes from the spool and is threaded through the eye of the needle. The lower thread comes from bobbin, the small transparent spool that you wind using the machine. It is best -to wind the bobbin before the needle. THE SPOOL HOLDER • Remove spool holder from spindle by sliding it to the left. • Place spool of thread on horizontal spool pin. If spool being used has a retaining slit, this should be placed against the spool cushion on the right. • Select correct spool holder according to type and diameter of the end of the spool being used. The diameter of the end of the spool holder should always be larger than that of the spool itself. • Press spool holder firmly against spool. THE BOBBIN THREAD Winding the Bobbin • Raise the presser foot and turn the hand wheel toward you until needle is at its highest position. • To disengage clutch, place your thumb directly on bobbin symbol located inside hand wheel disc and press down. • Open slide plate to make bobbin accessible. • Lift out bobbin and close slide plate to make sure needle plate is secure while winding. Spool Holders Press Here for Bobbin Winding 0 -7 Removing Bobbin 11