Singer SES2000 Instruction Manual - Page 74
Securing Material In Embroidery - embroidery hoops
View all Singer SES2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
SECURING MATERIAL IN EMBROIDERY HOOP 1. Loosen hoop adjusting screw on outer frame and remove 1 inner frame. Place material between inner and outer frame. 2. Slightly tighten the hoop adjusting screw and pull material edges to remove slack. 2 Fit the two frames together by pressing down on the inner frame. a. Tighten hoop adjusting screw. b. Press down on the inner frame to stretch the material into the outer frame, and then re-tighten the screw. Hoop adjusting screw Vis de réglage de cerceau Tornillo de ajuste de aro c. Tighten the material in the frames so that it makes a sound like a drum when the tightened surface is tapped with a finger. Once material is properly positioned in embroidery frame with no slack, securely tighten the screw. 74