Smeg C30GGXU1 Owners Manual - Page 10

Instructions for the user 5. USING THE RANGETOP FIRE HAZARD - Do not allow the burner flame to extend beyond the edge of the pan. WARNING - Turn off all controls when the range is not in use. NOTE: Check that the burner heads, burner caps and grates are correctly positioned. Before lighting the rangetop burners, check that each burner head is correctly positioned with its respective burner cap. Align slot A with the igniter and ensure that the pins B line up with slots C. Align the flarings D of the burner cap to the pins B and when positioned on the burner, rotate the burner cap slightly to ensure that it is stable. For the dual burner, place the burner cap G and F on the burner head E, ensuring that they fit snug. The burner head must be put on (taking care to use the spark electrode as a guide). 5.1 Ignition safety device Each burner knob has a marking corresponding to the burner it controls (the example at the left, shows the front left burner). The appliance is equipped with spark electrode ignition. - Just turn the knob counterclockwise to the simmer flame symbol until the burner turns on. NOTE: If the flame accidentally goes out, an automatic system will attempt to relight it. If the attempt to relight it is unsuccessful, an internal safety device will block the flow of gas. To restore the correct operation of the lighting system, return the knob to the position and repeat the procedure. REMEMBER: When the rangetop is in use, the entire range area may become hot. NOTE: Do not try to manually relight the flame. 12