Smeg EGF03BLUS Instruction manual - Page 21
Pre-brewing profiles
View all Smeg EGF03BLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
EN Use • Press the key corresponding to the desired setting to modify the temperature, as indicated in the table. Key Temperature to set 11 Low 12 Medium 13 Excellent 14 High • Press the key corresponding to the desired setting to modify the pre-brewing profile, as indicated in the table. Key Pre-brewing profile to set 11 Short pre-brewing 12 Standard pre-brewing 13 Pulse pre-brewing 14 Constant pre-brewing • The key selected will flash 3 times and a sound will be emitted (if the acoustic signals are active) to indicate the setting has been saved. Pre-brewing profiles The machine is set with a standard pre-brewing mode. Proceed as follows to change this setting: • Access the programming menu as indicated previously. • Press the key (14), it will flash 3 times to indicate selection. • The current setting is shown with the keys switching on, as shown in the following table: Key Set pre-brewing profile 11 Short pre-brewing 11.12 Standard pre-brewing 11,12,13 Pulse pre-brewing 11,12,13,14 Constant pre-brewing • The key selected will flash 3 times and a sound will be emitted (if the acoustic signals are active) to indicate the setting has been saved. When using pressurised filters (30a-30b), we suggest setting the "Short pre-brewing" profile. Acoustic signals The machine is pre-set with acoustic signals active. They can be deactivated by pressing buttons (11) and (12) at the same time for 5 seconds. Reset factory settings To reset the factory settings, press keys (12) and (13) simultaneously for 10 seconds. EN - 15