Sony BDV-E280 Operating Instructions - Page 49
[Audio Settings - drc
UPC - 027242809710
View all Sony BDV-E280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
[RGB]: Select this when connecting to a device with an HDCP-compliant DVI jack. x [HDMI Deep Color Output] [Auto]: Normally select this. [16bit], [12bit], [10bit]: Outputs 16bit/12bit/ 10bit video signals when the connected TV is compatible with Deep Color. [Off]: Select this when the picture is unstable or colors appear unnatural. x [Pause Mode] (BD/DVD VIDEO/DVD-R/ DVD-RW only) [Auto]: The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. [Frame]: The picture, including subjects that do not move dynamically, is output in high resolution. [Audio Settings] x [BD Audio MIX Setting] [On]: Outputs the audio obtained by mixing the interactive audio and secondary audio to the primary audio. [Off]: Outputs the primary audio only. x [Audio DRC] You can compress the dynamic range of the sound track. [Auto]: Performs playback at the dynamic range specified by the disc (BD-ROM only). [On]: The system reproduces the sound track with the kind of dynamic range that the recording engineer intended. [Off]: No compression of dynamic range. x [Attenuate - AUDIO] Distortion may occur when you listen to a component connected to the AUDIO (AUDIO IN L/R) jacks. You can prevent distortion by reducing the input level on the unit. [On]: Attenuates the input level. The output level is changed. [Off]: Normal input level. x [Audio Output] You can select the output method where the audio signal is output. [Speaker]: Outputs multi-channel sound from the system's speakers only. [Speaker + HDMI]: Outputs multi-channel sound from the system's speakers and 2-channel linear PCM signals from the HDMI (OUT) jack. [HDMI]: Outputs sound from the HDMI (OUT) jack only. Sound format depends on the connected component. • When [Control for HDMI] is set to [On] (page 51), [Audio Output] is set to [Speaker + HDMI] automatically and this setting cannot be changed. • When [Audio Output] is set to [HDMI], the output signal format for the "TV" function is 2-channel linear PCM. x [Sound Effect] You can set the system's sound effects (SOUND MODE and [Surround Setting]) to on/off. [On]: Enables all of the system's sound effects. The upper limit of sampling frequency is set to 48 kHz. [Off]: The sound effects are disabled. Select this when you do not want to set the upper limit of sampling frequency. x [Surround Setting] You can select the surround setting. For details, see "Step 6: Enjoying Surround Sound" (page 24) x [Speaker Settings] To obtain the best possible surround sound, set the speakers. For details, see "Setting the Speakers" (page 39). 49US Settings and Adjustments